Laguna Tools · MBAND1412-175
Ready to buy
The retained reference is $1,699 current manufacturer price. Blade, mobility kit and work light are not included in the base machine. Confirm stock, freight, voltage, floor or bench, dust airflow, blade supply, safe support and parts before payment.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Blade, mobility kit and work light are not included in the base machine. Confirm promotion, stock, authorization, tax, freight, liftgate, return and installation at checkout.
The 14|12 is the defended one-circuit premium reference when ceramic guides, a large table and 12-inch resaw geometry matter more than a foot brake.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
RIKON
Laguna Tools
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
14|12 Bandsaw was checked against manufacturer identity, manual or specification, parts or support, exact current U.S. price, independent woodworking evidence and bounded exact-model owner evidence.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner evidence is retained as a delivery, setup, blade, guide, fence, dust, maintenance and service checklist for 14|12 Bandsaw, not a performance, defect or safety rate.
Reports are self-selected and span different production dates, voltages, blades, stock, benches or floors, mobile bases, circuits, extraction, setup, maintenance and skill. They cannot prove population reliability, resaw accuracy, finish, safe capacity, dust control, code compliance, service rate or injury prevention.Self-selected exact-model owners discuss delivery, assembly, alignment, tracking, tension, guides, fence behavior, blades, dust collection, vibration, failures and service. Reports span stock, blades, circuits, extraction, setup and skill and do not establish accuracy, capacity, reliability, dust-control or safety rates.
Use the reports to define delivery and commissioning checks, then follow the exact manual and test with scrap before valuable or near-capacity stock.
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Laguna Tools identifies model MBAND1412-175 as a compact 14-inch steel-frame saw with 12-inch resaw capacity, 1.75 HP 115 V motor, ceramic guides and a tall low-position fence.
Laguna lists the current 14|12 at $1,699. Blade, mobility kit and work light are not included in the base machine
Approximately 13-5/8-inch throat, 12-inch nominal resaw capacity and 21-1/2 by 16-inch table at 38 inches high; verify current label and manual because published clearances can be rounded. 1.75 HP TEFC, 115 V motor on the current U.S. system; a rear convenience outlet does not expand circuit capacity and electrical loading must include any connected light. 115-inch blade length with supported widths about 1/8 to 3/4 inch, quick-release tension and tracking window. The base saw does not include a blade.
Laguna publishes a current manual, parts catalog, registration and U.S. service route. Some parts can be backordered, so confirm critical guide, tire, switch and fence availability. Fence, cabinet and setup hardware are included. Blade, mobility, light, dust hose and specialty work supports are separate.
OSHA identifies blade contact, stock control and point-of-operation hazards and describes guard adjustment and safe work practices. Applicability depends on the shop and operation.
OSHA identifies respiratory, skin, fire and explosion concerns from wood dust and addresses source capture. A port count or collector connection does not establish exposure control.
Fine Woodworking tested the exact platform's table, guides, fence, power, blade changes, dust collection and resawing. The reviewed setup and blade do not guarantee current-unit performance.
Self-selected exact-model owners discuss delivery, assembly, alignment, tracking, tension, guides, fence behavior, blades, dust collection, vibration, failures and service. Reports span stock, blades, circuits, extraction, setup and skill and do not establish accuracy, capacity, reliability, dust-control or safety rates.
10-326 14-Inch Deluxe Bandsaw is the heavy 14-inch cabinet and resaw alternative at $1,599.99 current authorized U.S. price.
14|BX Bandsaw 220 V is the 14-inch premium brake-equipped resaw alternative at $2,199 current manufacturer price.
Manufacturer identity, exact current U.S. price, current manual or specification, parts or support, independent woodworking test or operator evidence and bounded exact-model owner evidence were checked on August 18, 2026. This market covers complete current U.S.-supported woodworking bandsaws for serious home woodworkers, furniture and instrument makers and small professional shops, from capable compact systems through production-oriented floor machines. It excludes portable metal-cutting saws, horizontal saws, sawmills, meat saws, accessories and bare frames, unsupported imports, obsolete models, cosmetic finishes, dealer bundles and voltage, rail or package siblings counted only as padding. Preserve wheel and throat class, maximum cutting height and actual stock support; table size, height, tilt, trunnion and miter slot; motor input, voltage, phase, current, circuit, plug, conversion and magnetic control; blade length, width, speed, tooth and minimum-radius envelope; tension, tracking, wheel and tire condition; side guides, thrust guides, guidepost and guard clearance; fence height, low position, resaw bar, lead or drift adjustment and miter gauge; quick tension release, door or tension interlock, power disconnect, mechanical or electronic brake and measured coast-down; dust-port count and size, collector airflow, duct loss, cabinet cleaning and respirable dust; net and shipping weight, bench or floor, freight, rigging, mobile-base rating, floor stability, infeed, outfeed and lateral support; included blade, stand, fence and gauge versus required circuit, plug, extraction, blades and supports; assembly, table and fence alignment, blade inspection, tracking, tension, guide setting and scrap test cuts; cleaning, tires, bearings, brushes, belts, brake, parts, warranty and service. Disconnect and lock out power before installing blades, opening guards, clearing jams or making adjustments. Inspect the blade and weld, replace damaged or dull blades, set the upper guard just above the work, keep hands out of the blade path, use push sticks, jigs and work support, and wait for complete standstill. Do not wear gloves, jewelry or loose clothing near a moving blade, and secure hair. Never freehand round or unstable stock. A foot brake, interlock, guard or dust collector is a supplemental control and does not prevent contact, kick, thrown stock, blade breakage, fire, shock or dust exposure. Follow the manual, training, workplace, electrical, fire, permit and inspection requirements. No specification, capacity, price, review, owner report, blade, guide, fence, brake, guard, dust port, warranty or service plan guarantees straight cuts, resaw thickness, curve radius, surface finish, throughput, dust or noise exposure, code or workplace compliance, uptime, reliability, injury prevention or any project or safety outcome.
Researching another model?