Grizzly · G0555XH
Ready to buy
The retained reference is $1,695 current manufacturer price. The displayed price excludes freight, mobile base, electrical conversion work and application-specific blades. Confirm stock, freight, voltage, floor or bench, dust airflow, blade supply, safe support and parts before payment.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
The displayed price excludes freight, mobile base, electrical conversion work and application-specific blades. Confirm promotion, stock, authorization, tax, freight, liftgate, return and installation at checkout.
G0555XH is the defended Grizzly step for buyers who want 12-inch height in a single cast frame and included resaw hardware without a foot brake.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
Grizzly
Grizzly
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
G0555XH 14-Inch Extreme Series Resaw Bandsaw was checked against manufacturer identity, manual or specification, parts or support, exact current U.S. price, independent woodworking evidence and bounded exact-model owner evidence.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner evidence is retained as a delivery, setup, blade, guide, fence, dust, maintenance and service checklist for G0555XH 14-Inch Extreme Series Resaw Bandsaw, not a performance, defect or safety rate.
Reports are self-selected and span different production dates, voltages, blades, stock, benches or floors, mobile bases, circuits, extraction, setup, maintenance and skill. They cannot prove population reliability, resaw accuracy, finish, safe capacity, dust control, code compliance, service rate or injury prevention.Self-selected exact-model owners discuss delivery, assembly, alignment, tracking, tension, guides, fence behavior, blades, dust collection, vibration, failures and service. Reports span stock, blades, circuits, extraction, setup and skill and do not establish accuracy, capacity, reliability, dust-control or safety rates.
Use the reports to define delivery and commissioning checks, then follow the exact manual and test with scrap before valuable or near-capacity stock.
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Grizzly identifies model G0555XH as a 1.75 HP dual-voltage 14-inch cast-frame saw with integrated 12-inch height, two speeds, tall resaw fence and no riser joint.
Grizzly lists the current G0555XH at $1,695. The displayed price excludes freight, mobile base, electrical conversion work and application-specific blades
13-1/2-inch throat, 12-inch cutting height and 16-1/8 by 21-3/4-inch table on a tall one-piece cast frame; the 44-5/8-inch table height affects ergonomics and stock support. 1.75 HP, 110/220 V, 15/7.5 A motor prewired 110 V, with 1,690 and 2,950 FPM speeds. Conversion and plug remain code and manual work. 104 to 105-inch blades from 1/4 to 3/4 inch, ball-bearing side and thrust guides, tracking window and quick-release tension.
Grizzly supplies a current manual, versioned parts and U.S. support under a one-year limited warranty. Confirm manufacturing date for switches, guides and labels. Fence, miter gauge, work light and 3/8-inch 6-TPI blade are included. Mobile base, dust equipment and alternate blades are separate.
OSHA identifies blade contact, stock control and point-of-operation hazards and describes guard adjustment and safe work practices. Applicability depends on the shop and operation.
OSHA identifies respiratory, skin, fire and explosion concerns from wood dust and addresses source capture. A port count or collector connection does not establish exposure control.
WOOD Magazine tested the exact G0555XH alongside its peers and retained blade-guide, light, fence, table and cutting observations. The test setup does not establish current-unit reliability or guaranteed resaw accuracy.
Self-selected exact-model owners discuss delivery, assembly, alignment, tracking, tension, guides, fence behavior, blades, dust collection, vibration, failures and service. Reports span stock, blades, circuits, extraction, setup and skill and do not establish accuracy, capacity, reliability, dust-control or safety rates.
G0555 Classic 14-Inch Bandsaw is the traditional cast-frame 14-inch value alternative at $599 current manufacturer price.
G0817 14-Inch Super HD Resaw Bandsaw with Foot Brake is the heavy 14-inch maximum-height resaw alternative at $1,795 current manufacturer price.
Manufacturer identity, exact current U.S. price, current manual or specification, parts or support, independent woodworking test or operator evidence and bounded exact-model owner evidence were checked on August 18, 2026. This market covers complete current U.S.-supported woodworking bandsaws for serious home woodworkers, furniture and instrument makers and small professional shops, from capable compact systems through production-oriented floor machines. It excludes portable metal-cutting saws, horizontal saws, sawmills, meat saws, accessories and bare frames, unsupported imports, obsolete models, cosmetic finishes, dealer bundles and voltage, rail or package siblings counted only as padding. Preserve wheel and throat class, maximum cutting height and actual stock support; table size, height, tilt, trunnion and miter slot; motor input, voltage, phase, current, circuit, plug, conversion and magnetic control; blade length, width, speed, tooth and minimum-radius envelope; tension, tracking, wheel and tire condition; side guides, thrust guides, guidepost and guard clearance; fence height, low position, resaw bar, lead or drift adjustment and miter gauge; quick tension release, door or tension interlock, power disconnect, mechanical or electronic brake and measured coast-down; dust-port count and size, collector airflow, duct loss, cabinet cleaning and respirable dust; net and shipping weight, bench or floor, freight, rigging, mobile-base rating, floor stability, infeed, outfeed and lateral support; included blade, stand, fence and gauge versus required circuit, plug, extraction, blades and supports; assembly, table and fence alignment, blade inspection, tracking, tension, guide setting and scrap test cuts; cleaning, tires, bearings, brushes, belts, brake, parts, warranty and service. Disconnect and lock out power before installing blades, opening guards, clearing jams or making adjustments. Inspect the blade and weld, replace damaged or dull blades, set the upper guard just above the work, keep hands out of the blade path, use push sticks, jigs and work support, and wait for complete standstill. Do not wear gloves, jewelry or loose clothing near a moving blade, and secure hair. Never freehand round or unstable stock. A foot brake, interlock, guard or dust collector is a supplemental control and does not prevent contact, kick, thrown stock, blade breakage, fire, shock or dust exposure. Follow the manual, training, workplace, electrical, fire, permit and inspection requirements. No specification, capacity, price, review, owner report, blade, guide, fence, brake, guard, dust port, warranty or service plan guarantees straight cuts, resaw thickness, curve radius, surface finish, throughput, dust or noise exposure, code or workplace compliance, uptime, reliability, injury prevention or any project or safety outcome.
Researching another model?