012 known options · 1 fully checked
Fixed-speed entry
Simple belt-position benchtop machines whose minimum speed, work balance and accessory limits remain visible
Current market guide
Professional wood lathes
Current supported benchtop, midi and full-size wood lathes for serious turning, with exact swing and between-centers geometry, motor and speed range, spindle and taper standards, bed and headstock expansion, mass, rests, workholding, alignment, electrical and dust conditions, entanglement controls, service and no-finish-or-safety-outcome boundaries
Your place in the market
Compare the complete ownership choice
Compare usable geometry, low-speed behavior, motor and input, spindle and taper standards, headstock movement, extensions, workholding, mass and service
01
Before the shortlist
The first four answers do most of the work
A useful ranking starts only after the constraints specific to this market are clear.
- 01
What sound blank diameter and length, bowl depth, spindle work and outboard or bed-extension work must the lathe actually support?
- 02
What is the lowest usable speed, how are ranges changed and do motor, input voltage, reverse and braking fit the work and shop?
- 03
Which spindle thread, Morse taper, quill, indexing, chuck, jaws, faceplate, centers, tool rest, extension and stand are included or required?
- 04
Who owns unloading, anchoring, alignment, workholding checks, speed selection, face and eye protection, entanglement control, dust, sharpening and service?
02
Market education
Read only as far as you need
The path changes with your research stage. Each guide is built around a decision that removes part of the market.
01ready
Commission and operate the wood lathe
Plan delivery, alignment, mounting, workholding, dust and entanglement controls before turning the first blank
02Start hereCompare lathe drive, geometry and accessories
Compare low-speed control, spindle and bed geometry, workholding, expansion and service as one supported system
03orientingChoose a wood lathe by work size and shop
Match sound blank geometry, speed, support, power and working clearance before choosing a capacity class
03
Buying paths
The shortlist covers different ways to own the product
A useful market view needs a credible answer for each common budget, setup, and ownership pattern. These are the paths represented in the current desk.
029 known options · 6 fully checked
Electronic variable-speed midi
Compact and midi machines compared by motor, belt ranges, low-speed torque, reverse, extension geometry and bench or stand requirements
0315 known options · 10 fully checked
Outboard, pivot and bowl access
Sliding, swiveling, pivoting and supported outboard arrangements whose rest support, footprint, locking and re-alignment change with configuration
0412 known options · 8 fully checked
Long spindle and swivel work
Long beds, extensions and movable heads compared by true between-centers length, center alignment, tailstock travel and supported tool-rest reach
056 known options · 4 fully checked
Full-size VFD and sliding head
Heavy floor machines whose voltage, circuit, VFD ranges, head movement, mass and end-position work define the installed system
064 known options · 3 fully checked
Servo and direct drive
Electronic direct-drive and industrial-servo branches whose torque response, presets, braking and software controls do not replace safe speed or mounting
074 known options · 3 fully checked
Maximum-capacity production
Twenty-four-inch-class and maximum-swing systems retained with banjo clearance, blank integrity, lifting, rigging and actual support limits
084 known options · 2 fully checked
Domestic and configurable premium
North American premium platforms whose bed, stand, motor, extension, outboard and mobility choices must be priced as one exact machine
0925 known options · 15 fully checked
Alignment, workholding and service
Every tracked lathe retains spindle and taper fit, chuck and faceplate boundary, runout, center alignment, banjo, tailstock, included equipment, parts and warranty ownership
1025 known options · 15 fully checked
Speed, PPE and no finish guarantee
Every tracked lathe retains blank inspection, conservative speed, secure mounting, face protection, entanglement and no-glove controls without promising capacity, finish, safety or production outcomes
04
Current coverage
The products with a full market view
These pages connect current facts, alternatives, source history and a stated conclusion. The wider market follows below.
ProductPositionCurrent stateDepth
WEN
LA3424 12-Inch by 18-Inch Wood Lathe
LA3424$369.82 current direct U.S. priceThe low-cost complete reference
Current fixed-speed entry benchtop lathecurrent
11 sources15 current facts
Open page NOVA
Comet II DR Midi Lathe
46303$599.99 current direct U.S. priceThe compact variable-speed reference
Current compact electronic-variable-speed midi lathecurrent
11 sources15 current facts
Open page RIKON
70-150VSR 12-Inch by 16-1/2-Inch Midi Lathe
70-150VSR$899.97 current authorized U.S. priceThe conventional midi value reference
Current supported 1 HP midi VSR lathecurrent
11 sources15 current facts
Open page JET
JWL-1221VS 12-Inch by 21-Inch Variable-Speed Lathe
719200$989.99 current authorized U.S. priceThe long-bed premium midi reference
Current premium 1 HP midi lathecurrent
11 sources15 current facts
Open page Laguna Tools
Revo 12|16 Lathe
MLAREVO1216EVS$1,099 current direct U.S. priceThe compact bowl-access reference
Current PWM midi with outboard pathcurrent
11 sources15 current facts
Open page NOVA
Neptune 15-Inch Digital Direct Drive Lathe
55700$1,499.99 current direct U.S. priceThe direct-drive technology reference
Current smart direct-drive pivot-head midicurrent
11 sources15 current facts
Open page Record Power
Coronet Herald 14-Inch Swivel-Head Lathe
16005 / U.S. Herald$1,199.99 current authorized U.S. priceThe swivel-head compact reference
Current U.S.-supported swivel-head bench lathecurrent
11 sources15 current facts
Open page Oneway
1224 Lathe
1224$2,870 current authorized U.S. priceThe lifetime compact-machine reference
Current premium compact cabinet lathecurrent
11 sources15 current facts
Open page Harvey
TURBO T-40 14-Inch by 24-Inch Lathe
T-40$2,399 current direct promotional U.S. priceThe compact servo-drive reference
Current compact servo-motor lathecurrent
11 sources15 current facts
Open page JET
JWL-1440VSK 14-Inch by 40-Inch Lathe with Legs
719400K$2,749 current authorized U.S. priceThe long-spindle swivel-head reference
Current Reeves-drive swivel and sliding-head floor lathecurrent
11 sources15 current facts
Open page Laguna Tools
Revo 18|36 Lathe 220V
MLAREVO1836-220$3,649 current direct U.S. priceThe mainstream full-size reference
Current 2 HP 220 V sliding-head floor lathecurrent
11 sources15 current facts
Open page Powermatic
3520C 20-Inch by 35-Inch Lathe
1353001$5,999 current direct U.S. priceThe premium 2 HP full-size reference
Current flagship 2 HP sliding-head lathecurrent
11 sources15 current facts
Open page Harvey
TURBO T-60S 24-Inch by 48-Inch Lathe
T-60S$5,199 current direct promotional U.S. priceThe servo production reference
Current 24-inch servo production lathecurrent
11 sources15 current facts
Open page Powermatic
4224B 24-Inch by 42-Inch Lathe
1794224K$8,799 current direct U.S. priceThe maximum-mass production reference
Current 3 HP high-output flagship lathecurrent
11 sources15 current facts
Open page Robust Tools
American Beauty Standard Bed 2 HP Lathe
AB-SD$9,395 current direct U.S. base priceThe configurable premium reference
Current configurable U.S.-built premium lathecurrent
11 sources15 current facts
Open page 05
Wider market
25 products in the working index
Known models remain searchable while the deeper work is underway. They do not receive a recommendation until price, support, ownership and direct comparisons are checked.
ProductMarket positionCurrent stateResearch
RIKON
70-105 10-Inch by 18-Inch Mini Lathe
70-105Current simple belt-speed miniA supported 10-by-18-inch half-horsepower mini retained as the conventional fixed-speed cast-iron entry below RIKON's VSR platforms
currentOfficial source checked Aug 20
Market recordFull comparison in progress
Open record RIKON
70-1516VSR 12-Inch by 16-1/2-Inch Midi Lathe
70-1516VSRCurrent brushless 1.25 HP midi generationA materially updated RIKON midi with brushless 1.25 HP drive, magnetic controls and extension positions, retained separately from the still-supported 70-150VSR
currentOfficial source checked Aug 20
Market recordFull comparison in progress
Open record RIKON
70-3040 30-Inch by 40-Inch Sliding-Bed Lathe
70-3040Current sliding-bed maximum-swing systemA distinct heavy 30-inch swing platform whose powered sliding bed changes bowl access and footprint rather than merely adding a capacity sibling
currentOfficial source checked Aug 20
Market recordFull comparison in progress
Open record Grizzly
G0844 14-Inch by 20-Inch Benchtop Lathe
G0844Current value 14-inch VSR bench platformA 14-inch cast-iron variable-speed bench machine with reverse, three belt ranges and unusually broad current first-party parts coverage
currentOfficial source checked Aug 20
Market recordFull comparison in progress
Open record Grizzly
G0838 16-Inch by 24-Inch Variable-Speed Lathe
G0838Current compact sliding-head 2 HP floor latheA distinct 220 V VFD floor platform whose headstock slides to the tail end for supported outboard access, with a deep model-specific parts catalog
currentOfficial source checked Aug 20
Market recordFull comparison in progress
Open record Laguna Tools
Revo 15|24 Lathe
415241Current adjustable-height compact floor latheA 15-1/2-inch 110 V PWM floor system with sliding headstock, adjustable legs and Precise Point quill alignment between Laguna's midi and full-size branches
currentOfficial source checked Aug 20
Market recordFull comparison in progress
Open record NOVA
Nebula 18-Inch Smart Direct Drive Lathe
55600Current full-size smart direct-drive platformAn 18-inch floor system with direct-drive DVR motor, pivoting and sliding head, programmable control and remote, materially distinct from Neptune's bench form
currentOfficial source checked Aug 20
Market recordFull comparison in progress
Open record Record Power
Coronet Envoy 16-Inch Lathe
EnvoyCurrent U.S.-supported 16-inch swivel-head floor latheA larger Record Power branch with cast stand, 16-inch swing, swivel head and 24-inch spindle capacity rather than a Herald size package
currentOfficial source checked Aug 20
Market recordFull comparison in progress
Open record Robust Tools
Scout Lathe
SCOUTCurrent compact U.S.-built premium latheA 1 HP 110 V compact professional system with stainless ways and configurable stand and extension, materially distinct from the American Beauty's 25-inch class
currentOfficial source checked Aug 20
Market recordFull comparison in progress
Open record Oneway
1640 Lathe
1640Current mid-size Canadian cabinet latheA distinct 16-by-40-inch Oneway platform bridging the compact 1224 and large 24-inch systems with its own bed, stand, extension and outboard choices
currentOfficial source checked Aug 20
Market recordFull comparison in progress
Open record 06
Market language
The terms a useful comparison should define
- Swing over bed
- Nominal diameter clearance above the bed; it does not prove that a rough blank is sound, balanced, mountable or clear of the tool rest and banjo
- Between centers
- Nominal headstock-to-tailstock distance before allowing for centers, chuck, drill chuck, workholding and safe tool access
- Spindle thread and taper
- The exact mechanical interfaces for chucks, faceplates and centers; matching a family name does not verify shoulder seating, insert, jaw or load compatibility
- Outboard turning
- Work supported beyond the normal bed envelope with a documented headstock, extension, outrigger and tool-rest arrangement, not simply a larger claimed swing
Have a model or link already?