RIKON · 70-150VSR
Ready to buy
The retained reference is $899.97 current authorized U.S. price. Confirm stock for the base 70-150VSR, not the newer 70-1516VSR or a K bundle with chuck. Confirm workholding, circuit, floor or bench, unloading, safe blank range, PPE, maintenance and parts before payment.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Confirm stock for the base 70-150VSR, not the newer 70-1516VSR or a K bundle with chuck. Confirm stock, freight, liftgate, tax, promotion, return and authorized U.S. support at checkout.
70-150VSR suits buyers who want a 1 HP conventional midi with reverse and flexible bed-extension mounting while accepting a shorter stock bed and a platform now sharing the line with newer RIKON midi models.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
NOVA
Laguna Tools
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
70-150VSR 12-Inch by 16-1/2-Inch Midi Lathe was checked against manufacturer identity, manual, parts or support, exact current U.S. price, independent woodworking evidence and bounded owner evidence.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner evidence is retained as a delivery, setup, control, workholding, maintenance and service checklist for 70-150VSR 12-Inch by 16-1/2-Inch Midi Lathe, not a performance, capacity, defect or safety rate.
Reports are self-selected and span different serials, voltages, stands, benches, chucks, blanks, speeds, accessories, circuits, dust conditions, service regions, skill and maintenance. They cannot prove population reliability, runout, finish, safe capacity, code compliance, service rate or injury prevention.Self-selected exact-model owners discuss delivery, setup, alignment, controls, vibration, accessories, maintenance, failures and service. Reports are configuration-specific anecdotes, not performance, defect, capacity or safety rates.
Keep the exact serial and manual version and test controls, alignment and locks during the dealer return window
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
RIKON identifies 70-150VSR as a 12-inch 1 HP midi platform with three electronic-variable-speed belt ranges, reverse, movable controls and left or right extension positions.
Turners Warehouse lists the exact 70-150VSR at $899.97. Confirm stock for the base 70-150VSR, not the newer 70-1516VSR or a K bundle with chuck
12-inch swing and 16-1/2 inches between centers; compatible extensions can add spindle length or a documented left-side tool-rest position, but accessory geometry and safe support still limit actual work. 115 V, 1 HP DC motor with three belt ranges covering 250 to 3,200 RPM and forward or reverse. Low-speed torque depends on the correct belt range and work balance. 1-inch by 8 TPI spindle, MT2 headstock and tailstock, 3-1/2-inch quill travel, 24 indexing positions and 1-inch tool-rest post.
RIKON publishes the current manual, part diagrams, support number and five-year limited warranty terms. Confirm electronic-board and model-specific part stock because adjacent RIKON midi generations are not interchangeable by name alone. Spur center, live center, 3-inch faceplate, 6-inch Pro rest, knockout bars, wrenches and tool holder are included. A chuck and extension are separate in the base machine.
AAW recommends a full face shield, conservative startup speed, slower speeds for larger or rough work, locked tailstock and tool-rest assemblies and no gloves, loose clothing, jewelry or untied hair.
OSHA identifies rotating parts, point-of-operation contact, flying chips and thrown work, and addresses close tool-rest placement, guards and entanglement controls. Application to a shop depends on workplace and operation.
OSHA notes high-velocity wood-dust emission and recommends close source capture. A lathe package does not establish exposure control or compliance.
The independent product review examines the exact 70-150VSR architecture, controls and intended work. Affiliate and sample limits remain and its conclusions do not establish reliability or safe capacity.
Self-selected exact-model owners discuss delivery, setup, alignment, controls, vibration, accessories, maintenance, failures and service. Reports are configuration-specific anecdotes, not performance, defect, capacity or safety rates.
Comet II DR Midi Lathe is the compact electronic-variable-speed midi alternative at $599.99 current direct U.S. price.
Revo 12|16 Lathe is the pwm midi with compact outboard path alternative at $1,099 current direct U.S. price.
Manufacturer identity, exact current U.S. price, manual or specification, parts or support path, independent woodworking evidence and bounded owner or turner evidence were checked on August 20, 2026. This market covers complete current U.S.-supported benchtop, midi and full-size woodturning lathes for serious hobby and professional shops. It excludes metal lathes, duplicators and copy lathes, accessories, extensions and stands sold alone, unsupported imports, obsolete machines, cosmetic packages, chuck bundles and minor swing, bed or voltage siblings used only to pad the count. Preserve swing over bed and banjo, actual between-centers geometry, headstock and bed position, motor input and claimed output, voltage, phase, circuit and plug, belt ranges and electronic control, lowest usable speed, forward and reverse conditions, spindle thread and shoulder, taper, bore, indexing, quill and travel, fixed, sliding, swiveling and outboard paths, extension and rest support, weight, stand, floor, mobility and lifting, tool rest, banjo and tailstock behavior, included faceplate and centers versus required chuck, jaws, tools and sharpening, center alignment, runout, bed twist, setup and break-in, dust, chips, noise, electrical cooling, parts, warranty and service. A headline swing or horsepower figure does not approve a blank. Safe RPM depends on diameter, balance, soundness, mounting, drive and operator skill. Inspect stock and glue joints, rotate by hand, start at the lowest stable speed while standing out of the rotation plane, keep a locked rest close to the work and stop for vibration. Use impact-rated eye protection plus a full face shield, tie hair, remove loose clothing and jewelry and never wear gloves near rotating work. Guards, extraction, respiratory protection, hearing protection, electrical work, permits, workplace rules, fire control, rigging and training remain site-specific. Reverse can loosen threaded workholding unless positively secured as documented. Dust collection does not capture every chip or respirable particle. No manufacturer claim, capacity, price, review, owner report, drive feature, brake, jam sensor, guard, mounting system or service plan guarantees surface finish, runout, production capacity, uptime, code or workplace compliance, dust or noise control, workpiece retention, injury prevention or any safety outcome.
Researching another model?