Record Power · 16005 / U.S. Herald
Ready to buy
The retained reference is $1,199.99 current authorized U.S. price. Bench feet, tubular legs, extension, outrigger, inline stop and chuck are not included in the base price. Confirm workholding, circuit, floor or bench, unloading, safe blank range, PPE, maintenance and parts before payment.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Bench feet, tubular legs, extension, outrigger, inline stop and chuck are not included in the base price. Confirm stock, freight, liftgate, tax, promotion, return and authorized U.S. support at checkout.
Coronet Herald fits small shops that want a 14-inch bench footprint and genuine swivel-head bowl access while accepting an imported support chain and separate legs, feet and outrigger.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
Laguna Tools
Oneway
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
Coronet Herald 14-Inch Swivel-Head Lathe was checked against manufacturer identity, manual, parts or support, exact current U.S. price, independent woodworking evidence and bounded owner evidence.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner evidence is retained as a delivery, setup, control, workholding, maintenance and service checklist for Coronet Herald 14-Inch Swivel-Head Lathe, not a performance, capacity, defect or safety rate.
Reports are self-selected and span different serials, voltages, stands, benches, chucks, blanks, speeds, accessories, circuits, dust conditions, service regions, skill and maintenance. They cannot prove population reliability, runout, finish, safe capacity, code compliance, service rate or injury prevention.Self-selected exact-model owners discuss delivery, setup, alignment, controls, vibration, accessories, maintenance, failures and service. Reports are configuration-specific anecdotes, not performance, defect, capacity or safety rates.
Put U.S. support ownership and exact base-package contents in writing before purchase
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Record Power identifies 16005 / U.S. Herald as a 14-by-20-inch 120 V electronic-variable-speed bench lathe with a swiveling headstock, 95 RPM low end and 21-inch documented outboard envelope.
Turners Warehouse lists the U.S. Herald at $1,199.99. Bench feet, tubular legs, extension, outrigger, inline stop and chuck are not included in the base price
14-inch inboard swing and 20 inches between centers, with up to 21-inch documented bowl diameter in the supported swivel and outrigger configuration. Clearance is not a workpiece approval. 120 V, roughly 1 HP output with electronic variable speed from about 95 to 3,890 RPM across belt ranges and forward or reverse; the display reflects set speed behavior described in the manual. 1-1/4-inch by 8 TPI spindle, MT2 tapers, 1-inch rest post and model-specific quill travel. This larger thread changes chuck or insert choices from common mini platforms.
Record Power publishes the manual while Turners Warehouse supplies current U.S. machine, accessories and instructions. Confirm which party handles parts, freight, warranty and electrical service before ordering. Includes 3-inch faceplate, spur drive, live center, rest, knockout and locking hardware. Legs, bench feet, extension, outboard rest, chuck, tools and PPE remain separate.
AAW recommends a full face shield, conservative startup speed, slower speeds for larger or rough work, locked tailstock and tool-rest assemblies and no gloves, loose clothing, jewelry or untied hair.
OSHA identifies rotating parts, point-of-operation contact, flying chips and thrown work, and addresses close tool-rest placement, guards and entanglement controls. Application to a shop depends on workplace and operation.
OSHA notes high-velocity wood-dust emission and recommends close source capture. A lathe package does not establish exposure control or compliance.
An independent hands-on review covers assembly, belt drive, swivel head, power, vibration and rest behavior on the Herald. One reviewed unit cannot establish reliability or alignment for all units.
Self-selected exact-model owners discuss delivery, setup, alignment, controls, vibration, accessories, maintenance, failures and service. Reports are configuration-specific anecdotes, not performance, defect, capacity or safety rates.
Revo 12|16 Lathe is the pwm midi with compact outboard path alternative at $1,099 current direct U.S. price.
1224 Lathe is the premium compact cabinet and spindle lathe alternative at $2,870 current authorized U.S. price.
Manufacturer identity, exact current U.S. price, manual or specification, parts or support path, independent woodworking evidence and bounded owner or turner evidence were checked on August 20, 2026. This market covers complete current U.S.-supported benchtop, midi and full-size woodturning lathes for serious hobby and professional shops. It excludes metal lathes, duplicators and copy lathes, accessories, extensions and stands sold alone, unsupported imports, obsolete machines, cosmetic packages, chuck bundles and minor swing, bed or voltage siblings used only to pad the count. Preserve swing over bed and banjo, actual between-centers geometry, headstock and bed position, motor input and claimed output, voltage, phase, circuit and plug, belt ranges and electronic control, lowest usable speed, forward and reverse conditions, spindle thread and shoulder, taper, bore, indexing, quill and travel, fixed, sliding, swiveling and outboard paths, extension and rest support, weight, stand, floor, mobility and lifting, tool rest, banjo and tailstock behavior, included faceplate and centers versus required chuck, jaws, tools and sharpening, center alignment, runout, bed twist, setup and break-in, dust, chips, noise, electrical cooling, parts, warranty and service. A headline swing or horsepower figure does not approve a blank. Safe RPM depends on diameter, balance, soundness, mounting, drive and operator skill. Inspect stock and glue joints, rotate by hand, start at the lowest stable speed while standing out of the rotation plane, keep a locked rest close to the work and stop for vibration. Use impact-rated eye protection plus a full face shield, tie hair, remove loose clothing and jewelry and never wear gloves near rotating work. Guards, extraction, respiratory protection, hearing protection, electrical work, permits, workplace rules, fire control, rigging and training remain site-specific. Reverse can loosen threaded workholding unless positively secured as documented. Dust collection does not capture every chip or respirable particle. No manufacturer claim, capacity, price, review, owner report, drive feature, brake, jam sensor, guard, mounting system or service plan guarantees surface finish, runout, production capacity, uptime, code or workplace compliance, dust or noise control, workpiece retention, injury prevention or any safety outcome.
Researching another model?