Powermatic · 1794224K
Ready to buy
The retained reference is $8,799 current direct U.S. price. Confirm input and auxiliary outlet wiring, freight, lift equipment and exact included accessories; chuck, extraction and specialized rests remain separate. Confirm workholding, circuit, floor or bench, unloading, safe blank range, PPE, maintenance and parts before payment.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Confirm input and auxiliary outlet wiring, freight, lift equipment and exact included accessories; chuck, extraction and specialized rests remain separate. Confirm stock, freight, liftgate, tax, promotion, return and authorized U.S. support at checkout.
4224B is the high-output cast-iron choice when 24-inch native swing, 42-inch spindle work, 3 HP and integrated shop conveniences justify the price, footprint and nearly half-ton installation.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
Harvey
Robust Tools
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
4224B 24-Inch by 42-Inch Lathe was checked against manufacturer identity, manual, parts or support, exact current U.S. price, independent woodworking evidence and bounded owner evidence.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner evidence is retained as a delivery, setup, control, workholding, maintenance and service checklist for 4224B 24-Inch by 42-Inch Lathe, not a performance, capacity, defect or safety rate.
Reports are self-selected and span different serials, voltages, stands, benches, chucks, blanks, speeds, accessories, circuits, dust conditions, service regions, skill and maintenance. They cannot prove population reliability, runout, finish, safe capacity, code compliance, service rate or injury prevention.Self-selected exact-model owners discuss delivery, setup, alignment, controls, vibration, accessories, maintenance, failures and service. Reports are configuration-specific anecdotes, not performance, defect, capacity or safety rates.
Treat delivery, electrician, floor and future component replacement as part of the purchase price
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Powermatic identifies 1794224K as a 948-pound 24-by-42-inch 3 HP EVS floor lathe with sliding head, 40 to 3,500 RPM, 98 indexing positions, air nozzle and auxiliary receptacles.
Powermatic lists 1794224K at $8,799. Confirm input and auxiliary outlet wiring, freight, lift equipment and exact included accessories; chuck, extraction and specialized rests remain separate
24-inch swing and 42 inches between centers with a 948-pound base. Swing over the banjo, tool-rest reach and blank integrity can reduce useful diameter below the headline. 3 HP motor prewired for 220 V single-phase input with electronic variable speed around 40 to 3,500 RPM across ranges, forward and reverse. Exact input and auxiliary receptacle ratings require electrician review. 1-1/4-inch by 8 TPI spindle, MT2 tapers, 5/8-inch bore, 98 indexing positions and the exact long-quill and rest geometry in the current manual.
Powermatic publishes current manuals, OEM parts and five-year warranty support. A nearly half-ton machine creates major freight, labor and component-replacement boundaries. Powermatic's current inventory includes integrated air nozzle and receptacles plus standard turning hardware. Air supply, chuck, tools, collection, vacuum system and face protection remain separate.
AAW recommends a full face shield, conservative startup speed, slower speeds for larger or rough work, locked tailstock and tool-rest assemblies and no gloves, loose clothing, jewelry or untied hair.
OSHA identifies rotating parts, point-of-operation contact, flying chips and thrown work, and addresses close tool-rest placement, guards and entanglement controls. Application to a shop depends on workplace and operation.
OSHA notes high-velocity wood-dust emission and recommends close source capture. A lathe package does not establish exposure control or compliance.
Independent woodworking editorial examines the exact 4224B's mass, 24-inch capacity, 3 HP drive and integrated features. It does not certify shop installation or every current unit.
Self-selected exact-model owners discuss delivery, setup, alignment, controls, vibration, accessories, maintenance, failures and service. Reports are configuration-specific anecdotes, not performance, defect, capacity or safety rates.
TURBO T-60S 24-Inch by 48-Inch Lathe is the large-capacity industrial servo production lathe alternative at $5,199 current direct promotional U.S. price.
American Beauty Standard Bed 2 HP Lathe is the configurable domestic premium vessel and bowl lathe alternative at $9,395 current direct U.S. base price.
Manufacturer identity, exact current U.S. price, manual or specification, parts or support path, independent woodworking evidence and bounded owner or turner evidence were checked on August 20, 2026. This market covers complete current U.S.-supported benchtop, midi and full-size woodturning lathes for serious hobby and professional shops. It excludes metal lathes, duplicators and copy lathes, accessories, extensions and stands sold alone, unsupported imports, obsolete machines, cosmetic packages, chuck bundles and minor swing, bed or voltage siblings used only to pad the count. Preserve swing over bed and banjo, actual between-centers geometry, headstock and bed position, motor input and claimed output, voltage, phase, circuit and plug, belt ranges and electronic control, lowest usable speed, forward and reverse conditions, spindle thread and shoulder, taper, bore, indexing, quill and travel, fixed, sliding, swiveling and outboard paths, extension and rest support, weight, stand, floor, mobility and lifting, tool rest, banjo and tailstock behavior, included faceplate and centers versus required chuck, jaws, tools and sharpening, center alignment, runout, bed twist, setup and break-in, dust, chips, noise, electrical cooling, parts, warranty and service. A headline swing or horsepower figure does not approve a blank. Safe RPM depends on diameter, balance, soundness, mounting, drive and operator skill. Inspect stock and glue joints, rotate by hand, start at the lowest stable speed while standing out of the rotation plane, keep a locked rest close to the work and stop for vibration. Use impact-rated eye protection plus a full face shield, tie hair, remove loose clothing and jewelry and never wear gloves near rotating work. Guards, extraction, respiratory protection, hearing protection, electrical work, permits, workplace rules, fire control, rigging and training remain site-specific. Reverse can loosen threaded workholding unless positively secured as documented. Dust collection does not capture every chip or respirable particle. No manufacturer claim, capacity, price, review, owner report, drive feature, brake, jam sensor, guard, mounting system or service plan guarantees surface finish, runout, production capacity, uptime, code or workplace compliance, dust or noise control, workpiece retention, injury prevention or any safety outcome.
Researching another model?