JET · 719200
Ready to buy
The retained reference is $989.99 current authorized U.S. price. Confirm the 719200 variable-speed machine rather than JWL-1221SP, an extension package or used stock. Confirm workholding, circuit, floor or bench, unloading, safe blank range, PPE, maintenance and parts before payment.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Confirm the 719200 variable-speed machine rather than JWL-1221SP, an extension package or used stock. Confirm stock, freight, liftgate, tax, promotion, return and authorized U.S. support at checkout.
JWL-1221VS is the proven premium-midi choice when 21-inch spindle length, 60 RPM low range, mass and JET service matter more than swivel-head or true direct-drive operation.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
RIKON
Laguna Tools
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
JWL-1221VS 12-Inch by 21-Inch Variable-Speed Lathe was checked against manufacturer identity, manual, parts or support, exact current U.S. price, independent woodworking evidence and bounded owner evidence.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner evidence is retained as a delivery, setup, control, workholding, maintenance and service checklist for JWL-1221VS 12-Inch by 21-Inch Variable-Speed Lathe, not a performance, capacity, defect or safety rate.
Reports are self-selected and span different serials, voltages, stands, benches, chucks, blanks, speeds, accessories, circuits, dust conditions, service regions, skill and maintenance. They cannot prove population reliability, runout, finish, safe capacity, code compliance, service rate or injury prevention.Self-selected exact-model owners discuss delivery, setup, alignment, controls, vibration, accessories, maintenance, failures and service. Reports are configuration-specific anecdotes, not performance, defect, capacity or safety rates.
Verify the exact VS model and test the speed sensor, reverse and belt-tension mechanism before the return period ends
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
JET identifies 719200 as a heavy 12-by-21-inch 1 HP midi with two electronic speed ranges, reverse, digital RPM and ratchet belt tensioning.
Ohio Power Tool lists model 719200 at $989.99. Confirm the 719200 variable-speed machine rather than JWL-1221SP, an extension package or used stock
Nominal 12-inch swing and 21 inches between centers, with an optional bed extension for longer spindles. Capacity numbers are clearances, not promises for wet, cracked, glued or unbalanced blanks. 1 HP, 115 V electronic variable speed across 60 to 3,600 RPM with two belt ranges, digital display and forward or reverse; choose the low belt for torque rather than relying only on the dial. 1-inch by 8 TPI spindle, MT2 tapers and 24-position indexing with model-specific quill and rest dimensions; verify every chuck, faceplate and insert at the shoulder.
JET retains manuals, parts routing, authorized service and five-year limited warranty terms. Register the exact 719200 and confirm freight, bench and electronics service boundaries. Faceplate, spur center, live center, tool rest and basic setup hardware are included; four-jaw chuck, stand, extension, tools, sharpening, extraction and face shield remain separate.
AAW recommends a full face shield, conservative startup speed, slower speeds for larger or rough work, locked tailstock and tool-rest assemblies and no gloves, loose clothing, jewelry or untied hair.
OSHA identifies rotating parts, point-of-operation contact, flying chips and thrown work, and addresses close tool-rest placement, guards and entanglement controls. Application to a shop depends on workplace and operation.
OSHA notes high-velocity wood-dust emission and recommends close source capture. A lathe package does not establish exposure control or compliance.
The current product-specific editorial separates two belt ranges, mass, capacity and workflow tradeoffs. It does not validate every marketing or owner claim.
Self-selected exact-model owners discuss delivery, setup, alignment, controls, vibration, accessories, maintenance, failures and service. Reports are configuration-specific anecdotes, not performance, defect, capacity or safety rates.
70-150VSR 12-Inch by 16-1/2-Inch Midi Lathe is the high-torque conventional midi vsr alternative at $899.97 current authorized U.S. price.
Revo 12|16 Lathe is the pwm midi with compact outboard path alternative at $1,099 current direct U.S. price.
Manufacturer identity, exact current U.S. price, manual or specification, parts or support path, independent woodworking evidence and bounded owner or turner evidence were checked on August 20, 2026. This market covers complete current U.S.-supported benchtop, midi and full-size woodturning lathes for serious hobby and professional shops. It excludes metal lathes, duplicators and copy lathes, accessories, extensions and stands sold alone, unsupported imports, obsolete machines, cosmetic packages, chuck bundles and minor swing, bed or voltage siblings used only to pad the count. Preserve swing over bed and banjo, actual between-centers geometry, headstock and bed position, motor input and claimed output, voltage, phase, circuit and plug, belt ranges and electronic control, lowest usable speed, forward and reverse conditions, spindle thread and shoulder, taper, bore, indexing, quill and travel, fixed, sliding, swiveling and outboard paths, extension and rest support, weight, stand, floor, mobility and lifting, tool rest, banjo and tailstock behavior, included faceplate and centers versus required chuck, jaws, tools and sharpening, center alignment, runout, bed twist, setup and break-in, dust, chips, noise, electrical cooling, parts, warranty and service. A headline swing or horsepower figure does not approve a blank. Safe RPM depends on diameter, balance, soundness, mounting, drive and operator skill. Inspect stock and glue joints, rotate by hand, start at the lowest stable speed while standing out of the rotation plane, keep a locked rest close to the work and stop for vibration. Use impact-rated eye protection plus a full face shield, tie hair, remove loose clothing and jewelry and never wear gloves near rotating work. Guards, extraction, respiratory protection, hearing protection, electrical work, permits, workplace rules, fire control, rigging and training remain site-specific. Reverse can loosen threaded workholding unless positively secured as documented. Dust collection does not capture every chip or respirable particle. No manufacturer claim, capacity, price, review, owner report, drive feature, brake, jam sensor, guard, mounting system or service plan guarantees surface finish, runout, production capacity, uptime, code or workplace compliance, dust or noise control, workpiece retention, injury prevention or any safety outcome.
Researching another model?