Next full checkAug 24, 2026Price checks run sooner
01
Ready to buy
Confirm the exact saw and every system component
The retained reference is $349.99 current tool-only price. Add a recommended Blue Ion 4 Ah-or-larger pack, charger and exact Kreg 62-inch rail unless already owned. Recheck the exact package, blade, rail, connector, clamps, power, extraction, support and return terms before paying.
Buying stageMarket familiarity
02
Current market
The facts that change the ownership choice
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
QuestionCurrent answerFreshnessBasis
Current price
$349.99 current tool-only price
Add a recommended Blue Ion 4 Ah-or-larger pack, charger and exact Kreg 62-inch rail unless already owned. Confirm the current U.S. checkout price and exact package.
Refresh due after 7 daysDirect source1 evidence item
Market branch
Accessible proprietary-rail cordless system
Checked 7 days agoOur synthesis2 evidence items
Purchase boundary
KPTPS100A is the $349.99 tool-only saw with blade and dust bag; the battery kit, saw-and-rail kit and Master Kit contain the same saw and are not distinct products
Checked 7 days agoOur synthesis3 evidence items
Blade and rail compatibility
Uses a 6-1/2-inch, 20 mm-arbor, 1.6 mm-kerf Kreg blade and the proprietary ACS 62-inch rail; the corded ACS saw can trim a splinter strip differently, so one rail is not automatically calibrated to both saws
Checked 7 days agoOur synthesis3 evidence items
Cut depth and bevel
Maximum depth is 2-1/8 inches at 90 degrees and 1-1/2 inches at 45 degrees with -1-to-47-degree bevel; confirm the rail-aware setting and support beneath every plunge
Checked 7 days agoDirect source2 evidence items
Plunge and kickback protection
The full shroud, retracting riving knife, electronic brake and selectable anti-kickback switch reduce some hazards; the anti-kickback setting prevents reverse travel and no feature eliminates binding or contact
Checked 7 days agoOur synthesis3 evidence items
Dust path
A dust bag and vacuum port are included, but effective collection depends on the exact hose, collector, blade, material and cut; fine-dust controls remain necessary
Checked 7 days agoOur synthesis3 evidence items
Power and battery boundary
The bare saw uses Kreg 20V Blue Ion packs and Kreg recommends 4 Ah; no battery or charger is included and runtime varies with pack, blade, material and feed
Checked 7 days agoDirect source3 evidence items
Guard, support and PPE boundary
Inspect the riving knife and guard, support the work so the kerf cannot close, clamp the proprietary rail where needed, use eye, hearing and exposure-selected respiratory protection, and remove the pack before service
Checked 7 days agoOur synthesis3 evidence items
Current verdict
The Kreg ACS cordless path
Choose KPTPS100A when the Kreg 62-inch rail and project-table ecosystem fit the shop and the blade-left layout is acceptable.
Checked 7 days agoOur synthesis8 evidence items
03
Other paths
The alternatives change what the 20V Ionic Drive Plunge-Cut Track Saw is worth
These are not generic competitors. Each one represents a different way to buy into the same market.
01lower upfront
RYOBI
18V ONE+ HP Brushless Track Saw
$279 current tool-only reference
Best fit
Consumer-platform cordless entry system
Tradeoff
PTS01B is the bare tool; PTS01K is the same machine with battery, charger and track package and is not another product
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
notable
Current exact saw and system position retained
20V Ionic Drive Plunge-Cut Track Saw was checked against exact identity, price, support, independent editorial, owner evidence and explicit blade, rail, plunge, kickback, dust, power and PPE boundaries.
Price record
The price history starts here
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
$349.99 current tool-only price
Current reference priceA structured timeline will begin with the next source capture
05
Owner experience
What repeats after the purchase
Owner discussion returns to blade-left ergonomics, splinter-strip calibration, rail movement, new battery cost and acs table fit rather than cut-depth and price figures alone.
These are self-reported experiences across different blades, rails, batteries, extractors, materials, support conditions and skill levels. They identify acceptance checks and do not establish accuracy, compatibility, runtime, kickback, dust, injury, durability, reliability or failure rates.
SignalWhat owners reportOur readEvidence
blade-left ergonomics, splinter-strip calibration, rail movement, new battery cost and ACS table fit
Exact-model reviews discuss sheet breakdown, track movement, new battery investment and comparison with the corded ACS saw. They remain self-selected reports.
Treat the rail as paired calibration, clamp the first test cuts and compare the full pack-and-rail total rather than the bare price.
1 evidence record
06
Sources
Why we believe the current view
The page separates what a source states directly from what we conclude across sources.
Kreg identifies exact model KPTPS100A as a blade-left 6-1/2-inch cordless plunge saw for Kreg's 62-inch Adaptive Cutting System rail with riving knife, brake and anti-kickback control.
Kreg support documents the exact blade, rail, depth, bevel, plunge, guard, power and dust boundaries. KPTPS100A is the $349.99 tool-only saw with blade and dust bag; the battery kit, saw-and-rail kit and Master Kit contain the same saw and are not distinct products
Woodworking machinery and dust hazard controlsOccupational Safety and Health Administration · specification
OSHA's woodworking resources identify machine guarding, kickback, blade contact, electrical, noise and wood-dust hazards; product features do not replace work support, guarding, extraction, training or PPE controls.
The independent 2026 head-to-head tests exact model KPTPS100A for cut accuracy, power, ergonomics, dust collection, rail behavior and value. Its measurements are test-bound and do not establish universal accuracy, runtime, safety or durability.
Exact-model reviews discuss sheet breakdown, track movement, new battery investment and comparison with the corded ACS saw. They remain self-selected reports.
Manufacturer identity, current product-specific price, manual or support material, independent exact-model editorial and bounded owner evidence were checked on August 17, 2026. A track, riving knife, electronic control, brake, shroud or plunge lock reduces only some risks and cannot prevent every kickback, bind, fall, blade contact or bad cut. Use only a blade whose diameter, bore, kerf, plate thickness, tooth form, maximum RPM and material approval match the exact saw and any riving-knife requirements. Fully support the work without closing the kerf, clamp or restrain the guide rail when conditions require it, keep the plunge path and line of fire clear, and never pull the running saw backward unless the exact manual authorizes that operation. Disconnect mains power or remove all batteries before blade, base, guard, riving-knife, rail or service work. Select eye, hearing and respiratory protection from the material and exposure assessment, and use effective extraction; a dust bag or high collection percentage is not proof of safe exposure. No record promises accuracy, cut quality, compatibility, runtime, kickback prevention, injury prevention, dust control, durability, reliability or regulatory compliance.