Next full checkAug 24, 2026Price checks run sooner
01
Ready to buy
Confirm the exact saw and every system component
The retained reference is $849 current Plus-system price. Add the exact FS or FSK rail, clamps, extraction, blades and any rail-specific stops required by the work. Recheck the exact package, blade, rail, connector, clamps, power, extraction, support and return terms before paying.
Buying stageMarket familiarity
02
Current market
The facts that change the ownership choice
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
QuestionCurrent answerFreshnessBasis
Current price
$849 current Plus-system price
Add the exact FS or FSK rail, clamps, extraction, blades and any rail-specific stops required by the work. Confirm the current U.S. checkout price and exact package.
Refresh due after 7 daysDirect source1 evidence item
Market branch
Premium deep-cut corded system
Checked 7 days agoOur synthesis2 evidence items
Purchase boundary
The Plus SKU includes the saw, blade and Systainer but not an FS guide rail; Plus-FS and limited editions contain the same saw and are not distinct products
Checked 7 days agoOur synthesis3 evidence items
Blade and rail compatibility
Uses a 168 x 20 mm thin-kerf Festool blade and works with FS guide rails plus FSK crosscut rails; TS 55 blades and ordinary 165 mm blades are not substitutes
Checked 7 days agoOur synthesis3 evidence items
Cut depth and bevel
Maximum depth is 62 mm at 90 degrees and 45 mm at 45 degrees without rail, with -1-to-47-degree bevel; on FS rail at 45 degrees the supported work depth is lower
Checked 7 days agoDirect source2 evidence items
Plunge and kickback protection
Electronic KickbackStop and a quick brake can stop the motor after detected lift but do not form a riving knife and cannot prevent every kickback, contact or unsupported plunge
Checked 7 days agoOur synthesis3 evidence items
Dust path
The 27/36 mm Cleantec port and closed guard are designed for Festool extraction; sight-window position, hose, collector, blade and material control actual capture
Checked 7 days agoOur synthesis3 evidence items
Power and battery boundary
The 120 V, 1500 W corded EC-TEC motor requires a correctly rated circuit and extension arrangement; corded power does not guarantee feed rate or prevent overload
Checked 7 days agoDirect source3 evidence items
Guard, support and PPE boundary
Use the exact blade, test KickbackStop, support the kerf, stabilize the rail, route cord and hose clear, wear eye, hearing and exposure-selected respiratory protection, and unplug before blade or rail work
Checked 7 days agoOur synthesis3 evidence items
Current verdict
The deep-cut Festool all-rounder
Choose the TS 60 K when 62 mm depth, FS and FSK rail flexibility and corded continuity matter more than the smaller TS 55 format or cordless mobility.
Checked 7 days agoOur synthesis8 evidence items
03
Other paths
The alternatives change what the TS 60 K Track Saw is worth
These are not generic competitors. Each one represents a different way to buy into the same market.
01lower upfront
Makita
6-1/2-inch Plunge Circular Saw
$499 current saw-and-case reference
Best fit
Established corded professional value system
Tradeoff
SP6000J includes saw, blade and interlocking case but no rail; SP6000J1 and other retailer kits add a rail or accessories around the same machine
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
notable
Current exact saw and system position retained
TS 60 K Track Saw was checked against exact identity, price, support, independent editorial, owner evidence and explicit blade, rail, plunge, kickback, dust, power and PPE boundaries.
Price record
The price history starts here
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
$849 current Plus-system price
Current reference priceA structured timeline will begin with the next source capture
05
Owner experience
What repeats after the purchase
Owner discussion returns to 62 mm depth need, fs versus fsk use, kickbackstop behavior, blade inventory and extraction rather than cut-depth and price figures alone.
These are self-reported experiences across different blades, rails, batteries, extractors, materials, support conditions and skill levels. They identify acceptance checks and do not establish accuracy, compatibility, runtime, kickback, dust, injury, durability, reliability or failure rates.
SignalWhat owners reportOur readEvidence
62 mm depth need, FS versus FSK use, KickbackStop behavior, blade inventory and extraction
Owners discuss 60 mm-class depth, size, FS/FSK rails and alternatives. The discussion is self-selected and does not establish accuracy, safety or reliability rates.
Confirm that required material actually needs the deeper blade, then test both rail types and the exact extraction setup before finished cuts.
1 evidence record
06
Sources
Why we believe the current view
The page separates what a source states directly from what we conclude across sources.
01
TS 60 K Track Saw manufacturer recordFestool · identity
Festool identifies exact model TS 60 KEB-F-Plus as a 168 mm, 1500 W plunge saw with 62 mm depth, FS and FSK rail compatibility and electronic KickbackStop.
TS 60 K Track Saw manual and supportFestool · specification
Festool support documents the exact blade, rail, depth, bevel, plunge, guard, power and dust boundaries. The Plus SKU includes the saw, blade and Systainer but not an FS guide rail; Plus-FS and limited editions contain the same saw and are not distinct products
Woodworking machinery and dust hazard controlsOccupational Safety and Health Administration · specification
OSHA's woodworking resources identify machine guarding, kickback, blade contact, electrical, noise and wood-dust hazards; product features do not replace work support, guarding, extraction, training or PPE controls.
Festool current track-saw system comparisonSerious Grit · specification
Independent dealer editorial compares exact TS 60 depth, KickbackStop, weight and rail position with other Festool saws; it is not universal performance proof.
Current TS 60 ownership discussionFestool owners · consensus
Owners discuss 60 mm-class depth, size, FS/FSK rails and alternatives. The discussion is self-selected and does not establish accuracy, safety or reliability rates.
Manufacturer identity, current product-specific price, manual or support material, independent exact-model editorial and bounded owner evidence were checked on August 17, 2026. A track, riving knife, electronic control, brake, shroud or plunge lock reduces only some risks and cannot prevent every kickback, bind, fall, blade contact or bad cut. Use only a blade whose diameter, bore, kerf, plate thickness, tooth form, maximum RPM and material approval match the exact saw and any riving-knife requirements. Fully support the work without closing the kerf, clamp or restrain the guide rail when conditions require it, keep the plunge path and line of fire clear, and never pull the running saw backward unless the exact manual authorizes that operation. Disconnect mains power or remove all batteries before blade, base, guard, riving-knife, rail or service work. Select eye, hearing and respiratory protection from the material and exposure assessment, and use effective extraction; a dust bag or high collection percentage is not proof of safe exposure. No record promises accuracy, cut quality, compatibility, runtime, kickback prevention, injury prevention, dust control, durability, reliability or regulatory compliance.