Market IndexProduct intelligenceStudio headphonesSearch products
All marketsProfessional studio headphonesSony

Sony · MDR-7506

MDR-7506

A lightweight folding 63-ohm closed-back dynamic headphone with a fixed coiled cable and long-running broadcast, location and studio-monitoring role
Market statusCurrent closed-back broadcast and tracking standardChecked Aug 20
Reference price$114.99 current Sony U.S. priceSony lists the current new MDR-7506 at $114.99
Product cyclecurrentRelease history under review
EvidenceWell supported7 publishers · 3 independent
Next full checkAug 27, 2026Price checks run sooner
01

Ready to buy

Confirm the exact headphone, fit and source

The retained reference is $114.99 current Sony U.S. price. The retained system is the wired MDR-7506, not the discontinued MDR-V6, a counterfeit marketplace unit, a case bundle or replacement pads. Confirm seal, clamp, channel match, leakage, clean drive, parts, warranty and return terms before payment.

02

Current market

The facts that change the ownership choice

Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.

QuestionCurrent answerFreshnessBasis

Current price

$114.99 current Sony U.S. price

The retained system is the wired MDR-7506, not the discontinued MDR-V6, a counterfeit marketplace unit, a case bundle or replacement pads. Confirm authorized new stock, tax, shipping, promotion, included accessories and return terms at checkout.

Checked 3 days agoDirect source1 evidence item

Professional headphone branch

portable closed-back broadcast and tracking
Checked 3 days agoOur synthesis3 evidence items

Open, closed or semi-open design

Closed-back circumaural dynamic headphone with 40 mm drivers, folding yokes and approximately 230 g weight without treating its long production history as proof that every production lot measures identically.
Checked 3 days agoDirect source2 evidence items

Impedance, sensitivity and source drive

Sony specifies 63 ohms, 106 dB/mW sensitivity and a 10 Hz to 20 kHz frequency range. Interface noise, output impedance and available voltage still affect level and balance; rated sensitivity is not a safe listening level.
Checked 3 days agoOur synthesis3 evidence items

Isolation, leakage and tracking boundary

The closed cups reduce mid- and high-frequency spill but do little against low-frequency room or transport noise. Eyeglass arms, worn pads and jaw shape change the seal, bass and microphone leakage.
Checked 3 days agoOur synthesis3 evidence items

Fit, clamp, glasses and pads

The compact oval pads and moderate headband suit many mobile workflows but can press ears or glasses. Pad depth and surface age change coupling, and replacement pads require a fresh level and reference check.
Checked 3 days agoOur synthesis4 evidence items

Cable, cup connector and adapters

A fixed single-sided 3 m coiled cable ends in 3.5 mm TRS with a supplied 6.3 mm adapter. Cable failure is not field-detachable, so strain relief and repair downtime belong in the ownership decision.
Checked 3 days agoDirect source2 evidence items

Pads, parts, warranty and repair

Sony retains U.S. documentation and support for the exact model, and replacement pads remain available through parts channels. Confirm authorized new stock, serial identity, pad part and cable-repair route before institutional purchase.
Checked 3 days agoOur synthesis2 evidence items

Hearing-level boundary

Limit sound level and exposure duration and set cue and edit levels with a known reference. Strong isolation, high sensitivity, low impedance, maximum input power and amplifier headroom are capabilities, not safe listening instructions or hearing protection.
Checked 3 days agoOur synthesis3 evidence items

No sound, translation, comfort or reliability guarantee

A headphone, target curve, review, fixture measurement, pad, calibration profile, owner report, amplifier, warranty or service plan cannot guarantee neutral perception, mix translation, mastering accuracy, recording success, comfort, isolation, channel matching, reliability, hearing protection or another creative, commercial, health or safety result.
Checked 3 days agoOur synthesis4 evidence items

Current verdict

The familiar low-cost production reference

MDR-7506 remains the defended low-cost standard for speech editing, location work and tracking when a familiar bright-leaning presentation and repairable pads matter more than a detachable cable, spacious stage or strong low-frequency isolation.

Checked 3 days agoOur synthesis9 evidence items
03

Other paths

The alternatives change what the MDR-7506 is worth

These are not generic competitors. Each one represents a different way to buy into the same market.

01ownership

Audio-Technica

ATH-M50x

$159 current Audio-Technica U.S. black price
Best fit
portable closed-back multi-cable all-rounder
Tradeoff
Closed-back circumaural dynamic design with 45 mm drivers, swiveling and folding earcups and 285 g weight without cable; one-ear rotation is a workflow feature, not evidence of matched response in every position. Audio-Technica specifies 38 ohms, 99 dB sensitivity and 15 Hz to 28 kHz response. Low nominal impedance supports common interfaces, but source output impedance, amplifier current and listening level still require validation. Circumaural pads attenuate useful room and cue spill when sealed, but passive isolation is fit- and frequency-dependent and cannot replace hearing protection or a quieter tracking environment.
Open the source
02ownership

Sennheiser

HD 280 PRO

$99.95 current U.S. price
Best fit
high-isolation closed-back tracking workhorse
Tradeoff
Closed-back circumaural dynamic headphone with folding and rotating cups and approximately 285 g weight. Current hardware identity is kept separate from visibly earlier headband generations. Sennheiser specifies 64 ohms, 113 dB SPL sensitivity and 8 Hz to 25 kHz response. Source headroom and noise remain interface-specific, and high isolation can encourage unsafe hidden levels. Sennheiser claims up to 32 dB ambient attenuation under its basis. Actual low-frequency isolation, microphone bleed and perceived room level depend on seal, pads, glasses and fit.
Open the source
04

What changed

The product has a history

Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.

  1. notable

    Current professional studio-headphone evidence retained

    MDR-7506 was checked against manufacturer identity, exact current U.S. price, specification or manual, U.S. support, independent measurements or professional editorial and bounded exact-model owner evidence.

Price record

The price history starts here

Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.

  1. $114.99 current Sony U.S. price

    Current reference priceA structured timeline will begin with the next source capture

05

Owner experience

What repeats after the purchase

Owner evidence is retained as a fit, pad, seal, leakage, cable, drive and service checklist for MDR-7506, not a sound, translation, comfort, defect or hearing-safety rate.

Reports are self-selected and span unlike heads, glasses, pads, listening levels, interfaces, amplifiers, rooms, production lots and service regions. They cannot establish population response, comfort, channel matching, reliability, mix translation, isolation or hearing safety.
SignalWhat owners reportOur readEvidence

pad flaking, eyeglass seal, upper-mid and treble emphasis, fixed-cable strain, folding hinge and driver repair

Self-selected exact-model owners discuss fit, clamp, eyeglass seal, pad wear, tonal change, isolation, leakage, cable faults, driver matching, source drive and service. Reports span different heads, pads, units, levels and chains, so they define acceptance checks rather than population sound, translation, comfort or reliability rates.

Reference a known pair and inspect pads before a session instead of treating the model name or decades of use as a calibration certificate

1 evidence record
06

Sources

Why we believe the current view

The page separates what a source states directly from what we conclude across sources.

01
MDR-7506 current manufacturer identitySony · identity

Sony identifies MDR-7506 as a lightweight folding 63-ohm closed-back dynamic headphone with a fixed coiled cable and long-running broadcast, location and studio-monitoring role.

Source type
manufacturer
Content hash
5dc2dd3b89f73916
Use
store excerpt
Open Sony
02
MDR-7506 exact current U.S. priceAuthorized U.S. retailer · price

Sony lists the current new MDR-7506 at $114.99. The retained system is the wired MDR-7506, not the discontinued MDR-V6, a counterfeit marketplace unit, a case bundle or replacement pads

Source type
retailer
Content hash
c9cd589c3c172e56
Use
store snapshot
Open Authorized U.S. retailer
03
MDR-7506 specification and manualSony · specification

Closed-back circumaural dynamic headphone with 40 mm drivers, folding yokes and approximately 230 g weight without treating its long production history as proof that every production lot measures identically. Sony specifies 63 ohms, 106 dB/mW sensitivity and a 10 Hz to 20 kHz frequency range. Interface noise, output impedance and available voltage still affect level and balance; rated sensitivity is not a safe listening level. A fixed single-sided 3 m coiled cable ends in 3.5 mm TRS with a supplied 6.3 mm adapter. Cable failure is not field-detachable, so strain relief and repair downtime belong in the ownership decision.

Source type
support
Content hash
1b50f7198d327e09
Use
store excerpt
Open Sony
04
MDR-7506 U.S. support and serviceSony · specification

Sony retains U.S. documentation and support for the exact model, and replacement pads remain available through parts channels. Confirm authorized new stock, serial identity, pad part and cable-repair route before institutional purchase. The compact oval pads and moderate headband suit many mobile workflows but can press ears or glasses. Pad depth and surface age change coupling, and replacement pads require a fresh level and reference check.

Source type
support
Content hash
2425bd29a749961b
Use
store excerpt
Open Sony
05
Sony MDR-7506 measured reviewSoundGuys · specification

Independent lab measurements cover frequency response and passive isolation and identify midrange and treble departures from the test target. One fixture, fit and sample do not establish every unit, head or translation result.

Source type
editorial
Content hash
a764db9e5c073365
Use
store excerpt
Open SoundGuys
06
MDR-7506 bounded owner discussionsStudio-headphone owners · consensus

Self-selected exact-model owners discuss fit, clamp, eyeglass seal, pad wear, tonal change, isolation, leakage, cable faults, driver matching, source drive and service. Reports span different heads, pads, units, levels and chains, so they define acceptance checks rather than population sound, translation, comfort or reliability rates.

Source type
community
Content hash
b7c1221918846a6b
Use
store excerpt
Open Studio-headphone owners
07
Sound level and hearing-exposure boundaryNIOSH · specification

NIOSH explains that both sound level and exposure duration affect hearing risk. Headphone sensitivity, isolation, maximum input or amplifier headroom does not establish a safe level or duration.

Source type
editorial
Content hash
c64f748977bba8d8
Use
store excerpt
Open NIOSH
08
ATH-M50x defended alternativeAudio-Technica · alternative

ATH-M50x is the portable closed-back multi-cable all-rounder alternative at $159 current Audio-Technica U.S. black price.

Source type
manufacturer
Content hash
d94591f39d17db37
Use
store excerpt
Open Audio-Technica
09
HD 280 PRO defended alternativeSennheiser · alternative

HD 280 PRO is the high-isolation closed-back tracking workhorse alternative at $99.95 current U.S. price.

Source type
manufacturer
Content hash
e6e857f3baced162
Use
store excerpt
Open Sennheiser

Manufacturer identity, exact current U.S. price, specification or manual, support path, independent measurements or professional editorial and bounded exact-model owner evidence were checked on August 20, 2026. This desk covers current U.S.-supported wired over-ear headphones used for recording, tracking, editing, mixing or mastering across open, closed and semi-open professional or reference branches. It excludes consumer Bluetooth-first and noise-cancelling models, gaming headsets, aviation headsets, in-ear monitors, bare drivers, cosmetic editions, discontinued or used-only models and marketplace-only unsupported products. Preserve exact acoustic principle, driver and generation, impedance and whether sensitivity is stated per volt or per milliwatt, amplifier output impedance, voltage and current, clean headroom, open-back leakage, closed-back isolation basis, eyeglass and jaw seal, headband pressure, weight, ear clearance, pad material and wear, pad-dependent voicing, left-right matching, cable length, cup connector and adapter, included case or alternate pads, replacement parts, warranty, service region and repair freight. Manufacturer frequency range, sensitivity, distortion and isolation claims remain tied to their published method. Independent fixture measurements are fit- and rig-dependent, while owner reports are self-selected. No specification, price, review, target curve, calibration profile, pad, headphone, amplifier, warranty or service plan guarantees neutral sound, mix translation, mastering accuracy, recording success, comfort, isolation, reliability, hearing protection or any creative, commercial, health or safety outcome. Limit sound level and exposure duration; high sensitivity, strong isolation or available amplifier power is not a safe listening-level instruction.

Researching another model?

Search the current market