Market IndexProduct intelligenceStudio headphonesSearch products
All marketsProfessional studio headphonesShure

Shure · SRH840A

SRH840A

A 40-ohm closed-back dynamic headphone with 40 mm matched drivers, padded folding headband, detachable locking cable and supported replacement pads
Market statusCurrent closed-back studio monitor with replaceable cableChecked Aug 20
Reference price$169 current U.S. priceSweetwater lists the current SRH840A at $169
Product cyclecurrentRelease history under review
EvidenceWell supported7 publishers · 3 independent
Next full checkAug 27, 2026Price checks run sooner
01

Ready to buy

Confirm the exact headphone, fit and source

The retained reference is $169 current U.S. price. The A revision is retained; original SRH840, SRH440A, SRH1540, communication-cable bundles and used units are different systems. Confirm seal, clamp, channel match, leakage, clean drive, parts, warranty and return terms before payment.

02

Current market

The facts that change the ownership choice

Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.

QuestionCurrent answerFreshnessBasis

Current price

$169 current U.S. price

The A revision is retained; original SRH840, SRH440A, SRH1540, communication-cable bundles and used units are different systems. Confirm authorized new stock, tax, shipping, promotion, included accessories and return terms at checkout.

Checked 3 days agoDirect source1 evidence item

Professional headphone branch

mid-price closed-back tracking and production
Checked 3 days agoOur synthesis3 evidence items

Open, closed or semi-open design

Closed-back circumaural dynamic design with matched 40 mm neodymium drivers, collapsible yokes and padded headband. The A revision changes chassis and package from the original SRH840.
Checked 3 days agoDirect source2 evidence items

Impedance, sensitivity and source drive

Shure specifies 40 ohms, 97 dB/mW sensitivity and 5 Hz to 25 kHz response. Headphone-amplifier noise, current, output impedance and actual program level remain system checks.
Checked 3 days agoOur synthesis3 evidence items

Isolation, leakage and tracking boundary

Closed cups reduce room sound and microphone bleed but are not specified hearing protection. Pad seal, glasses and headband adjustment govern low-frequency coupling and leakage.
Checked 3 days agoOur synthesis3 evidence items

Fit, clamp, glasses and pads

Padded circumaural construction targets extended sessions, while clamp, ear clearance and heat vary by wearer. Supported replacement pads change seal as they age or are renewed.
Checked 3 days agoOur synthesis4 evidence items

Cable, cup connector and adapters

A detachable locking 3 m straight cable terminates in 3.5 mm with a threaded 6.3 mm adapter; Shure also offers a separate coiled replacement. Confirm the proprietary cup lock before using generic cables.
Checked 3 days agoDirect source2 evidence items

Pads, parts, warranty and repair

Shure retains a current U.S. product page, guide, two-year warranty, replacement SRH840A pads, straight and coiled cables and service portal. Verify parts inventory and repair pricing for fleet use.
Checked 3 days agoOur synthesis2 evidence items

Hearing-level boundary

Limit sound level and exposure duration and set cue and edit levels with a known reference. Strong isolation, high sensitivity, low impedance, maximum input power and amplifier headroom are capabilities, not safe listening instructions or hearing protection.
Checked 3 days agoOur synthesis3 evidence items

No sound, translation, comfort or reliability guarantee

A headphone, target curve, review, fixture measurement, pad, calibration profile, owner report, amplifier, warranty or service plan cannot guarantee neutral perception, mix translation, mastering accuracy, recording success, comfort, isolation, channel matching, reliability, hearing protection or another creative, commercial, health or safety result.
Checked 3 days agoOur synthesis4 evidence items

Current verdict

The balanced mid-price closed-back reference

SRH840A is the defended mid-price closed monitor when a detachable cable, supported pads and controlled all-purpose studio balance matter more than open staging, ultralight weight or several included cable lengths.

Checked 3 days agoOur synthesis9 evidence items
03

Other paths

The alternatives change what the SRH840A is worth

These are not generic competitors. Each one represents a different way to buy into the same market.

01lower upfront

Sennheiser

HD 280 PRO

$99.95 current U.S. price
Best fit
high-isolation closed-back tracking workhorse
Tradeoff
Closed-back circumaural dynamic headphone with folding and rotating cups and approximately 285 g weight. Current hardware identity is kept separate from visibly earlier headband generations. Sennheiser specifies 64 ohms, 113 dB SPL sensitivity and 8 Hz to 25 kHz response. Source headroom and noise remain interface-specific, and high isolation can encourage unsafe hidden levels. Sennheiser claims up to 32 dB ambient attenuation under its basis. Actual low-frequency isolation, microphone bleed and perceived room level depend on seal, pads, glasses and fit.
Open the source
02premium

AKG

K371

$199 current U.S. price
Best fit
lightweight reference-curve closed-back
Tradeoff
Closed-back oval circumaural design with 50 mm titanium-coated dynamic diaphragms, folding hinges and 255 g weight. Its target-based tuning claim remains separate from measured fit consistency. AKG specifies 32 ohms, 114 dB SPL/V sensitivity and 5 Hz to 40 kHz bandwidth. High voltage sensitivity does not remove output-impedance, noise-floor or safe-level checks. The oval slow-retention pads provide useful passive isolation and leakage control only with a complete seal. Jaw shape, glasses, hair and headband position can produce large low-frequency changes.
Open the source
04

What changed

The product has a history

Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.

  1. notable

    Current professional studio-headphone evidence retained

    SRH840A was checked against manufacturer identity, exact current U.S. price, specification or manual, U.S. support, independent measurements or professional editorial and bounded exact-model owner evidence.

Price record

The price history starts here

Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.

  1. $169 current U.S. price

    Current reference priceA structured timeline will begin with the next source capture

05

Owner experience

What repeats after the purchase

Owner evidence is retained as a fit, pad, seal, leakage, cable, drive and service checklist for SRH840A, not a sound, translation, comfort, defect or hearing-safety rate.

Reports are self-selected and span unlike heads, glasses, pads, listening levels, interfaces, amplifiers, rooms, production lots and service regions. They cannot establish population response, comfort, channel matching, reliability, mix translation, isolation or hearing safety.
SignalWhat owners reportOur readEvidence

headband pressure, hinge, pad heat, locking-cable availability, low-frequency seal and repair economics

Self-selected exact-model owners discuss fit, clamp, eyeglass seal, pad wear, tonal change, isolation, leakage, cable faults, driver matching, source drive and service. Reports span different heads, pads, units, levels and chains, so they define acceptance checks rather than population sound, translation, comfort or reliability rates.

Keep SRH840A revision identity explicit and price pads and cable before assuming the detachable design removes downtime

1 evidence record
06

Sources

Why we believe the current view

The page separates what a source states directly from what we conclude across sources.

01
SRH840A current manufacturer identityShure · identity

Shure identifies SRH840A as a 40-ohm closed-back dynamic headphone with 40 mm matched drivers, padded folding headband, detachable locking cable and supported replacement pads.

Source type
manufacturer
Content hash
8e43b3e323c27854
Use
store excerpt
Open Shure
02
SRH840A exact current U.S. priceAuthorized U.S. retailer · price

Sweetwater lists the current SRH840A at $169. The A revision is retained; original SRH840, SRH440A, SRH1540, communication-cable bundles and used units are different systems

Source type
retailer
Content hash
35b80a751aa312ed
Use
store snapshot
Open Authorized U.S. retailer
03
SRH840A specification and manualShure · specification

Closed-back circumaural dynamic design with matched 40 mm neodymium drivers, collapsible yokes and padded headband. The A revision changes chassis and package from the original SRH840. Shure specifies 40 ohms, 97 dB/mW sensitivity and 5 Hz to 25 kHz response. Headphone-amplifier noise, current, output impedance and actual program level remain system checks. A detachable locking 3 m straight cable terminates in 3.5 mm with a threaded 6.3 mm adapter; Shure also offers a separate coiled replacement. Confirm the proprietary cup lock before using generic cables.

Source type
support
Content hash
4e56987251e1110f
Use
store excerpt
Open Shure
04
SRH840A U.S. support and serviceShure · specification

Shure retains a current U.S. product page, guide, two-year warranty, replacement SRH840A pads, straight and coiled cables and service portal. Verify parts inventory and repair pricing for fleet use. Padded circumaural construction targets extended sessions, while clamp, ear clearance and heat vary by wearer. Supported replacement pads change seal as they age or are renewed.

Source type
support
Content hash
60b45e89482d2428
Use
store excerpt
Open Shure
05
Shure SRH840A measured reviewSoundGuys · specification

Independent measurement-led review examines response, isolation, fit and build for the A revision. Fixture seal and one unit cannot establish every wearer's balance or durability.

Source type
editorial
Content hash
ad5e4b042e03ac9a
Use
store excerpt
Open SoundGuys
06
SRH840A bounded owner discussionsStudio-headphone owners · consensus

Self-selected exact-model owners discuss fit, clamp, eyeglass seal, pad wear, tonal change, isolation, leakage, cable faults, driver matching, source drive and service. Reports span different heads, pads, units, levels and chains, so they define acceptance checks rather than population sound, translation, comfort or reliability rates.

Source type
community
Content hash
b7c1221918846a6b
Use
store excerpt
Open Studio-headphone owners
07
Sound level and hearing-exposure boundaryNIOSH · specification

NIOSH explains that both sound level and exposure duration affect hearing risk. Headphone sensitivity, isolation, maximum input or amplifier headroom does not establish a safe level or duration.

Source type
editorial
Content hash
c64f748977bba8d8
Use
store excerpt
Open NIOSH
08
HD 280 PRO defended alternativeSennheiser · alternative

HD 280 PRO is the high-isolation closed-back tracking workhorse alternative at $99.95 current U.S. price.

Source type
manufacturer
Content hash
e6e857f3baced162
Use
store excerpt
Open Sennheiser
09
K371 defended alternativeAKG · alternative

K371 is the lightweight reference-curve closed-back alternative at $199 current U.S. price.

Source type
manufacturer
Content hash
a8203bdb169f18cc
Use
store excerpt
Open AKG

Manufacturer identity, exact current U.S. price, specification or manual, support path, independent measurements or professional editorial and bounded exact-model owner evidence were checked on August 20, 2026. This desk covers current U.S.-supported wired over-ear headphones used for recording, tracking, editing, mixing or mastering across open, closed and semi-open professional or reference branches. It excludes consumer Bluetooth-first and noise-cancelling models, gaming headsets, aviation headsets, in-ear monitors, bare drivers, cosmetic editions, discontinued or used-only models and marketplace-only unsupported products. Preserve exact acoustic principle, driver and generation, impedance and whether sensitivity is stated per volt or per milliwatt, amplifier output impedance, voltage and current, clean headroom, open-back leakage, closed-back isolation basis, eyeglass and jaw seal, headband pressure, weight, ear clearance, pad material and wear, pad-dependent voicing, left-right matching, cable length, cup connector and adapter, included case or alternate pads, replacement parts, warranty, service region and repair freight. Manufacturer frequency range, sensitivity, distortion and isolation claims remain tied to their published method. Independent fixture measurements are fit- and rig-dependent, while owner reports are self-selected. No specification, price, review, target curve, calibration profile, pad, headphone, amplifier, warranty or service plan guarantees neutral sound, mix translation, mastering accuracy, recording success, comfort, isolation, reliability, hearing protection or any creative, commercial, health or safety outcome. Limit sound level and exposure duration; high sensitivity, strong isolation or available amplifier power is not a safe listening-level instruction.

Researching another model?

Search the current market