Market IndexProduct intelligenceSoldering and rework stationsSearch products
All marketsProfessional soldering and rework stationsWeller

Weller · T0053503699N

WXR 3032 Rework Station

A WXR 3 power unit packaged with WXP 65 iron, WXDV 120 vertical desoldering iron and WXHAP 200 hot-air tool, with two internal pumps
Market statusCurrent 120 V three-channel solder, desolder and hot-air rework packageChecked Aug 18
Reference priceAbout $5,200 current U.S. complete-system referenceCurrent U.S. reference for exact model T0053503699N
Product cyclecurrentRelease history under review
EvidenceWell supported7 publishers · 3 independent
Next full checkAug 25, 2026Price checks run sooner
01

Ready to buy

Confirm every tool, tip and service dependency

The retained reference is About $5,200 current U.S. complete-system reference. Recheck the exact U.S. voltage, package, included handpieces, tips or nozzles, stands, filters, cords, software, warranty, calibration and return terms before paying.

Buying stageMarket familiarity
02

Current market

The facts that change the ownership choice

Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.

QuestionCurrent answerFreshnessBasis

Current price

About $5,200 current U.S. complete-system reference

Confirm current checkout or quoted price, seller authorization, voltage, package contents, consumables and return rights before paying.

Refresh due soonDirect source1 evidence item

Market branch

Integrated three-channel hot-air and vacuum rework
Checked 6 days agoOur synthesis2 evidence items

Exact package and channels

T0053503699N is the 120 V WXR 3032 package with three named tools; WXR3 power unit-only, WXR3030/3031 and 230 V sets have different contents
Checked 6 days agoOur synthesis3 evidence items

Input voltage and total power

The 120 V WXR 3 is a three-channel system rated 420 W with up to 600 W managed output under stated conditions; channel demand and tool limits govern simultaneous use
Checked 6 days agoDirect source2 evidence items

Setpoint, display and thermal boundary

WXP 65, WXDV 120 and WXHAP 200 each have tool-specific ranges and sensors; one display does not equal common recovery or a validated rework profile
Checked 6 days agoOur synthesis2 evidence items

Tip, nozzle and consumable ecosystem

The package spans WX soldering tips, DX desolder nozzles and hot-air nozzles, plus filters and stands; exact tool, nozzle and consumable mapping must be retained
Checked 6 days agoOur synthesis3 evidence items

Standby, profiles and process controls

Per-tool recognition, presets, setback, vacuum run-on and channel power management can reduce setup variation only after configuration and operator procedures are controlled
Checked 6 days agoOur synthesis3 evidence items

Airflow, vacuum and maintenance

Separate internal pumps support hot air and pickup/desolder functions with published hot-air flow conditions; filter loading, hose condition and compressed-flow assumptions need maintenance
Checked 6 days agoOur synthesis2 evidence items

ESD and grounding

Weller lists ESD-safe tools and a hard-grounded equipotential connection; verify all three handpieces, hoses, station earth and EPA after service
Checked 6 days agoOur synthesis2 evidence items

Firmware, profiles and access

USB, RS232, switching outputs, firmware and parameter monitoring require supported media, version records and access control
Checked 6 days agoOur synthesis3 evidence items

Service and calibration

Three heater/tool ecosystems, pump filters, hoses, nozzles, calibration and Weller repair make service breadth a central purchase factor
Checked 6 days agoOur synthesis3 evidence items

Burn, fire, lead and flux boundary

Hot air, vacuum, multiple hot tools and stored solder create burn, fire, fume and debris hazards; isolate, cool, extract, shield and clean according to each manual
Checked 6 days agoOur synthesis3 evidence items

No workmanship or safety guarantee

No setpoint, wattage, cartridge architecture, recovery claim, airflow, vacuum, profile, calibration, ESD mark, software trace, review or owner report guarantees joint quality, pad preservation, repair success, reliability, exposure control or safety. Follow the exact manuals and a validated local process.
Checked 6 days agoOur synthesis5 evidence items

Current verdict

The integrated three-channel hot-air and vacuum rework path

WXR 3032 Rework Station. is defensible when its exact package, consumable ecosystem, controls, extraction, service and safety boundaries fit the retained workflow.

Checked 6 days agoOur synthesis10 evidence items
03

Other paths

The alternatives change what the WXR 3032 Rework Station is worth

These are not generic competitors. Each one represents a different way to buy into the same market.

01lower upfront

JBC

DMPSE Complete Rework Station

$4,810 current 120 V complete-system reference
Best fit
Integrated multichannel assembly and through-hole rework
Tradeoff
DMPSE-1QD is the current 120 V QD package with four named tools and electric MSE pump; it is not the discontinued RMSE, the compressed-air DMPVE or a hot-air system, and most cartridges are not included
Open the source
02ownership

Hakko

FR-810B SMD Hot Air Rework Station

$916.77 current U.S. exact-model reference
Best fit
Repeat SMD hot-air removal
Tradeoff
FR810B-05 is the 120 V station, handpiece, holder and pickup accessories; Hakko USA states that hot-air nozzles are sold separately, so older bundles are not comparable
Open the source
04

What changed

The product has a history

Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.

  1. notable

    Current exact station and evidence retained

    WXR 3032 Rework Station was checked against manufacturer identity and manual, current U.S. price, independent coverage, bounded owner evidence and explicit package, ecosystem, extraction, grounding, software, service and no-outcome boundaries.

Price record

The price history starts here

Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.

  1. About $5,200 current U.S. complete-system reference

    Current reference priceA structured timeline will begin with the next source capture

05

Owner experience

What repeats after the purchase

Owner discussion is retained as a checklist for deep bench footprint, three-tool cable and hose routing, pump noise, wx and dx consumables, presets, usb and service, not as a workmanship, reliability, exposure or safety rate.

Self-selected reports span different station revisions, voltages, tips, nozzles, boards, alloys, fluxes, extraction, maintenance, settings and operator skill. They cannot prove that another sample, joint or rework process is effective or safe.
SignalWhat owners reportOur readEvidence

deep bench footprint, three-tool cable and hose routing, pump noise, WX and DX consumables, presets, USB and service

Operators report both successful work and friction involving deep bench footprint, three-tool cable and hose routing, pump noise, wx and dx consumables, presets, usb and service.

Lay out the exact bench, extraction and service access, then qualify solder, suction and hot-air paths separately before using them in one workflow.

1 evidence record
06

Sources

Why we believe the current view

The page separates what a source states directly from what we conclude across sources.

01
WXR 3032 Rework Station official identity and specificationWeller · identity

Weller identifies exact model T0053503699N as a WXR 3 power unit packaged with WXP 65 iron, WXDV 120 vertical desoldering iron and WXHAP 200 hot-air tool, with two internal pumps. T0053503699N is the 120 V WXR 3032 package with three named tools; WXR3 power unit-only, WXR3030/3031 and 230 V sets have different contents

Source type
manufacturer
Content hash
57f8065717440312…
Use
store excerpt
Open Weller
02
WXR 3032 Rework Station current U.S. exact-model priceAuthorized U.S. electronics-tool market · price

About $5,200 current U.S. complete-system reference is retained for exact model T0053503699N, subject to the stated voltage and package boundary.

Source type
retailer
Content hash
e7329f541ebbc6fc…
Use
store snapshot
Open Authorized U.S. electronics-tool market
03
WXR 3032 Rework Station manual and operating limitsWeller · specification

The 120 V WXR 3 is a three-channel system rated 420 W with up to 600 W managed output under stated conditions; channel demand and tool limits govern simultaneous use WXP 65, WXDV 120 and WXHAP 200 each have tool-specific ranges and sensors; one display does not equal common recovery or a validated rework profile The package spans WX soldering tips, DX desolder nozzles and hot-air nozzles, plus filters and stands; exact tool, nozzle and consumable mapping must be retained Per-tool recognition, presets, setback, vacuum run-on and channel power management can reduce setup variation only after configuration and operator procedures are controlled Separate internal pumps support hot air and pickup/desolder functions with published hot-air flow conditions; filter loading, hose condition and compressed-flow assumptions need maintenance

Source type
support
Content hash
76120234665786d5…
Use
store excerpt
Open Weller
04
Weller support, calibration and service pathWeller · specification

Three heater/tool ecosystems, pump filters, hoses, nozzles, calibration and Weller repair make service breadth a central purchase factor

Source type
support
Content hash
5fe134477b4c6e64…
Use
store excerpt
Open Weller
05
Lead exposure from heating and soldering metalNIOSH · specification

NIOSH identifies heating or soldering metal as a possible lead-fume task and emphasizes that fumes and dust can be invisible. Alloy identity, hygiene, exposure assessment and controls remain local responsibilities.

Source type
support
Content hash
2b6e26f7d487045b…
Use
store excerpt
Open NIOSH
06
Electronics soldering flux-fume evaluationNIOSH · consensus

NIOSH's electronics-assembly evaluation identifies flux-fume exposure and recommends ventilation improvements, monitoring and keeping eating, drinking and smoking out of the work area. A bench fan is not proof of effective capture.

Source type
editorial
Content hash
74f16a8b88db59ac…
Use
store excerpt
Open NIOSH
07
WXR 3032 Rework Station independent product or system coverageIndependent electronics tester · specification

Independent coverage examines the exact model or its closest retained system for controls, package, tips, response, workflow or service. Conditions and samples differ, so it cannot establish wxp 65, wxdv 120 and wxhap 200 each have tool-specific ranges and sensors; one display does not equal common recovery or a validated rework profile.

Source type
editorial
Content hash
ddf753096928e014…
Use
store excerpt
Open Independent electronics tester
08
WXR 3032 Rework Station owner and operator discussionsElectronics technicians and station owners · consensus

Self-selected operators discuss deep bench footprint, three-tool cable and hose routing, pump noise, wx and dx consumables, presets, usb and service. Their boards, settings, tips, alloys, fluxes, extraction, maintenance and skill differ and cannot establish workmanship, reliability or safety rates.

Source type
community
Content hash
147a24ebbcae84b7…
Use
store excerpt
Open Electronics technicians and station owners
09
DMPSE Complete Rework Station comparison alternativeJBC · alternative

DMPSE Complete Rework Station represents the integrated multichannel assembly and through-hole rework branch at $4,810 current 120 V complete-system reference.

Source type
manufacturer
Content hash
0edd8f84de659def…
Use
store excerpt
Open JBC
10
FR-810B SMD Hot Air Rework Station comparison alternativeHakko · alternative

FR-810B SMD Hot Air Rework Station represents the repeat smd hot-air removal branch at $916.77 current U.S. exact-model reference.

Source type
manufacturer
Content hash
a82a771875063858…
Use
store excerpt
Open Hakko

Manufacturer identity, package, specifications and manual or support, a current U.S. price path, independent product or adjacent-system coverage, bounded owner discussion and service access were checked on August 18, 2026. The desk covers complete current or currently supported professional hand-soldering, tweezer, vacuum-desoldering and hot-air rework stations for electronics assembly and repair. Standalone pencil irons without a coherent station path, consumer craft tools, unsupported imports, cosmetic bundles and tip, nozzle or accessory packs counted as products are excluded. Preserve exact station, handpiece, channel and package identity; tip, cartridge, nozzle, filter and consumable ecosystem; input voltage and total power; setpoint, display, calibration, setback and standby behavior; heater and sensor architecture; airflow and nozzle conditions; vacuum maintenance; grounding; software and service. Setpoint, wattage, recovery, airflow, vacuum, ESD, profile, firmware, review and owner evidence never guarantee joint quality, rework outcome, reliability or safety.

Researching another model?

Search the current market