Current price
$675 current Weller U.S. MSRP reference
Refresh due soonDirect source1 evidence itemConfirm current checkout or quoted price, seller authorization, voltage, package contents, consumables and return rights before paying.
Weller · WT1010N
WT1010 Kit 120V
A WT 1 power unit with WTP 90 iron, WSR 200 rest and XNT/THM passive-tip path, with offset, lock, process-window and RS232 functionsMarket statusCurrent 120 V one-channel 95 W soldering kitChecked Aug 18
Reference price$675 current Weller U.S. MSRP referenceCurrent U.S. reference for exact model WT1010N
Product cyclecurrentRelease history under review
EvidenceWell supported7 publishers · 3 independent
Next full checkAug 25, 2026Price checks run sooner
01
Ready to buy
Confirm every tool, tip and service dependency
The retained reference is $675 current Weller U.S. MSRP reference. Recheck the exact U.S. voltage, package, included handpieces, tips or nozzles, stands, filters, cords, software, warranty, calibration and return terms before paying.
Buying stageMarket familiarity
02
Current market
The facts that change the ownership choice
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
QuestionCurrent answerFreshnessBasis
Market branch
Conventional general-purpose production soldering
Checked 6 days agoOur synthesis2 evidence itemsExact package and channels
WT1010N is the 120 V WT 1, WTP 90 and WSR 200 kit; other WT1011/12/13 packages use different irons or tips and the power unit alone is not this system
Checked 6 days agoOur synthesis3 evidence itemsInput voltage and total power
The station is 120 V, 95 W and one channel with the 90 W WTP 90 tool; exact fuse, grounded cord and equipotential connection remain part of setup
Checked 6 days agoDirect source2 evidence itemsSetpoint, display and thermal boundary
The published range is 150 to 850 °F depending on tool with accuracy and stability conditions; passive-tip response depends on tip fit, heater and joint load
Checked 6 days agoOur synthesis2 evidence itemsTip, nozzle and consumable ecosystem
WTP 90 uses XNT and high-mass THM tips; it is not a Weller RT active-cartridge or WX tool path
Checked 6 days agoOur synthesis3 evidence itemsStandby, profiles and process controls
Off time, process window, lock, offset and the two-mode sponge/brass rest require parameter and cleaning discipline
Checked 6 days agoOur synthesis3 evidence itemsAirflow, vacuum and maintenance
No hot air, vacuum or fume extractor is included; compatible extraction and local capture must be specified separately
Checked 6 days agoOur synthesis2 evidence itemsESD and grounding
Weller lists ESD-safe construction and equipotential bonding; verify cord, receptacle, tip-ground path and EPA rather than relying on the housing label
Checked 6 days agoOur synthesis2 evidence itemsFirmware, profiles and access
RS232 automation and switching output are not USB or network traceability; record any external controller and protocol version
Checked 6 days agoOur synthesis3 evidence itemsService and calibration
WTP 90 heaters, XNT/THM tips, rest consumables, fuse, calibration and Weller service determine continued support
Checked 6 days agoOur synthesis3 evidence itemsBurn, fire, lead and flux boundary
Disconnect before internal work, park the iron securely, keep combustible materials clear and use extraction, eye protection and alloy/flux hygiene
Checked 6 days agoOur synthesis3 evidence itemsNo workmanship or safety guarantee
No setpoint, wattage, cartridge architecture, recovery claim, airflow, vacuum, profile, calibration, ESD mark, software trace, review or owner report guarantees joint quality, pad preservation, repair success, reliability, exposure control or safety. Follow the exact manuals and a validated local process.
Checked 6 days agoOur synthesis5 evidence itemsCurrent verdict
The conventional general-purpose production soldering path
Checked 6 days agoOur synthesis10 evidence itemsWT1010 Kit 120V. is defensible when its exact package, consumable ecosystem, controls, extraction, service and safety boundaries fit the retained workflow.
03
Other paths
The alternatives change what the WT1010 Kit 120V is worth
These are not generic competitors. Each one represents a different way to buy into the same market.
01lower upfront
Hakko
FX-971 Soldering Station
$329.97 current Hakko USA package reference- Best fit
- Mainstream professional single-port soldering
- Tradeoff
- FX971-010 includes the 120 V station, standard FX-9701 handpiece and holder but no T39 tip; FX971-011 is station-only and FX-972 is a different dual-port system
02ownership
PACE
ADS200 PLUS Production Soldering Station with ISB
$342.93 current PACE direct exact-package reference- Best fit
- Value-focused professional cartridge soldering
- Tradeoff
- 8007-0579 is the current PLUS station with TD-200 and ISB stand; power-source-only, standard-stand, three-tip and MiniTweez packages are different, and a working tip package must be confirmed
04
What changed
The product has a history
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
- notable
Current exact station and evidence retained
WT1010 Kit 120V was checked against manufacturer identity and manual, current U.S. price, independent coverage, bounded owner evidence and explicit package, ecosystem, extraction, grounding, software, service and no-outcome boundaries.
Price record
The price history starts here
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
- $675 current Weller U.S. MSRP reference
Current reference priceA structured timeline will begin with the next source capture
05
Owner experience
What repeats after the purchase
Owner discussion is retained as a checklist for xnt and thm cost, passive-tip fit, rest behavior, offset, lock menus, rs232 and service, not as a workmanship, reliability, exposure or safety rate.
Self-selected reports span different station revisions, voltages, tips, nozzles, boards, alloys, fluxes, extraction, maintenance, settings and operator skill. They cannot prove that another sample, joint or rework process is effective or safe.SignalWhat owners reportOur readEvidence
XNT and THM cost, passive-tip fit, rest behavior, offset, lock menus, RS232 and service
Operators report both successful work and friction involving xnt and thm cost, passive-tip fit, rest behavior, offset, lock menus, rs232 and service.
Compare the exact XNT and cartridge alternatives on representative joints and retain a temperature-check method before selecting familiarity over ecosystem change.
1 evidence record06
Sources
Why we believe the current view
The page separates what a source states directly from what we conclude across sources.
01WT1010 Kit 120V official identity and specificationWeller · identity
Weller identifies exact model WT1010N as a WT 1 power unit with WTP 90 iron, WSR 200 rest and XNT/THM passive-tip path, with offset, lock, process-window and RS232 functions. WT1010N is the 120 V WT 1, WTP 90 and WSR 200 kit; other WT1011/12/13 packages use different irons or tips and the power unit alone is not this system
- Source type
- manufacturer
- Content hash
- 555d8df34932a7fa…
- Use
- store excerpt
02WT1010 Kit 120V current U.S. exact-model priceAuthorized U.S. electronics-tool market · price
$675 current Weller U.S. MSRP reference is retained for exact model WT1010N, subject to the stated voltage and package boundary.
- Source type
- retailer
- Content hash
- 02cfc2dcf6f45e43…
- Use
- store snapshot
03WT1010 Kit 120V manual and operating limitsWeller · specification
The station is 120 V, 95 W and one channel with the 90 W WTP 90 tool; exact fuse, grounded cord and equipotential connection remain part of setup The published range is 150 to 850 °F depending on tool with accuracy and stability conditions; passive-tip response depends on tip fit, heater and joint load WTP 90 uses XNT and high-mass THM tips; it is not a Weller RT active-cartridge or WX tool path Off time, process window, lock, offset and the two-mode sponge/brass rest require parameter and cleaning discipline No hot air, vacuum or fume extractor is included; compatible extraction and local capture must be specified separately
- Source type
- support
- Content hash
- 9cdcbd2f3fe3eb10…
- Use
- store excerpt
04Weller support, calibration and service pathWeller · specification
WTP 90 heaters, XNT/THM tips, rest consumables, fuse, calibration and Weller service determine continued support
- Source type
- support
- Content hash
- d3980901ac2787ce…
- Use
- store excerpt
05Lead exposure from heating and soldering metalNIOSH · specification
NIOSH identifies heating or soldering metal as a possible lead-fume task and emphasizes that fumes and dust can be invisible. Alloy identity, hygiene, exposure assessment and controls remain local responsibilities.
- Source type
- support
- Content hash
- 2b6e26f7d487045b…
- Use
- store excerpt
06Electronics soldering flux-fume evaluationNIOSH · consensus
NIOSH's electronics-assembly evaluation identifies flux-fume exposure and recommends ventilation improvements, monitoring and keeping eating, drinking and smoking out of the work area. A bench fan is not proof of effective capture.
- Source type
- editorial
- Content hash
- 74f16a8b88db59ac…
- Use
- store excerpt
07WT1010 Kit 120V independent product or system coverageIndependent electronics tester · specification
Independent coverage examines the exact model or its closest retained system for controls, package, tips, response, workflow or service. Conditions and samples differ, so it cannot establish the published range is 150 to 850 °f depending on tool with accuracy and stability conditions; passive-tip response depends on tip fit, heater and joint load.
- Source type
- editorial
- Content hash
- 88d68102bd7f464e…
- Use
- store excerpt
08WT1010 Kit 120V owner and operator discussionsElectronics technicians and station owners · consensus
Self-selected operators discuss xnt and thm cost, passive-tip fit, rest behavior, offset, lock menus, rs232 and service. Their boards, settings, tips, alloys, fluxes, extraction, maintenance and skill differ and cannot establish workmanship, reliability or safety rates.
- Source type
- community
- Content hash
- deacd69696bfe5e3…
- Use
- store excerpt
09FX-971 Soldering Station comparison alternativeHakko · alternative
FX-971 Soldering Station represents the mainstream professional single-port soldering branch at $329.97 current Hakko USA package reference.
- Source type
- manufacturer
- Content hash
- 8815980630f4875f…
- Use
- store excerpt
10ADS200 PLUS Production Soldering Station with ISB comparison alternativePACE · alternative
ADS200 PLUS Production Soldering Station with ISB represents the value-focused professional cartridge soldering branch at $342.93 current PACE direct exact-package reference.
- Source type
- manufacturer
- Content hash
- 5f0e37d7550015ac…
- Use
- store excerpt
Manufacturer identity, package, specifications and manual or support, a current U.S. price path, independent product or adjacent-system coverage, bounded owner discussion and service access were checked on August 18, 2026. The desk covers complete current or currently supported professional hand-soldering, tweezer, vacuum-desoldering and hot-air rework stations for electronics assembly and repair. Standalone pencil irons without a coherent station path, consumer craft tools, unsupported imports, cosmetic bundles and tip, nozzle or accessory packs counted as products are excluded. Preserve exact station, handpiece, channel and package identity; tip, cartridge, nozzle, filter and consumable ecosystem; input voltage and total power; setpoint, display, calibration, setback and standby behavior; heater and sensor architecture; airflow and nozzle conditions; vacuum maintenance; grounding; software and service. Setpoint, wattage, recovery, airflow, vacuum, ESD, profile, firmware, review and owner evidence never guarantee joint quality, rework outcome, reliability or safety.
Researching another model?