Market IndexProduct intelligenceSoldering and rework stationsSearch products
All marketsProfessional soldering and rework stationsHakko

Hakko · FR810B-05

FR-810B SMD Hot Air Rework Station

An 820 W station with turbine airflow, 50 to 600 °C setpoint, integrated pickup, five presets, chained profiles, holder and heat-resistant pads
Market statusCurrent 120 V turbine hot-air station with vacuum pickupChecked Aug 18
Reference price$916.77 current U.S. exact-model referenceCurrent U.S. reference for exact model FR810B-05
Product cyclecurrentRelease history under review
EvidenceWell supported7 publishers · 3 independent
Next full checkAug 25, 2026Price checks run sooner
01

Ready to buy

Confirm every tool, tip and service dependency

The retained reference is $916.77 current U.S. exact-model reference. Recheck the exact U.S. voltage, package, included handpieces, tips or nozzles, stands, filters, cords, software, warranty, calibration and return terms before paying.

Buying stageMarket familiarity
02

Current market

The facts that change the ownership choice

Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.

QuestionCurrent answerFreshnessBasis

Current price

$916.77 current U.S. exact-model reference

Confirm current checkout or quoted price, seller authorization, voltage, package contents, consumables and return rights before paying.

Refresh due soonDirect source1 evidence item

Market branch

Repeat SMD hot-air removal
Checked 6 days agoOur synthesis2 evidence items

Exact package and channels

FR810B-05 is the 120 V station, handpiece, holder and pickup accessories; Hakko USA states that hot-air nozzles are sold separately, so older bundles are not comparable
Checked 6 days agoOur synthesis3 evidence items

Input voltage and total power

The 120 V station consumes 820 W with a 790 W heater; confirm circuit headroom, grounded cord, holder clearance and cool-down operation
Checked 6 days agoDirect source2 evidence items

Setpoint, display and thermal boundary

The display range is 50 to 600 °C, but nozzle size, distance, airflow, preheat, shielding, board mass and sensor placement determine assembly temperature
Checked 6 days agoOur synthesis2 evidence items

Tip, nozzle and consumable ecosystem

The current unit uses Hakko's N51 and documented legacy-compatible nozzle path, with each nozzle, pickup pad and heat shield selected for the exact package and access
Checked 6 days agoOur synthesis3 evidence items

Standby, profiles and process controls

Five temperature, airflow and time presets can be chained as a simple profile; that sequence is not a measured closed-loop board profile and must be validated independently
Checked 6 days agoOur synthesis3 evidence items

Airflow, vacuum and maintenance

The turbine publishes airflow settings corresponding to roughly 5 to 115 L/min and the handpiece includes pickup vacuum; neither airflow nor pickup indicates solder release or safe lift
Checked 6 days agoOur synthesis2 evidence items

ESD and grounding

ESD-safe labeling depends on the grounded station and intact handpiece; hot air can charge, move or overheat components despite that label
Checked 6 days agoOur synthesis2 evidence items

Firmware, profiles and access

Preset and password control are local; retain units, airflow level, timing and firmware or parameter state because the segmented display does not document the work
Checked 6 days agoOur synthesis3 evidence items

Service and calibration

Heater, turbine, handpiece, nozzles, pickup pads and support parts are available, while calibration and airflow verification require a defined service plan
Checked 6 days agoOur synthesis3 evidence items

Burn, fire, lead and flux boundary

Hot air can burn skin, ignite material, propel debris and overheat batteries or sealed parts; remove prohibited energy sources, shield neighbors, use extraction, eye protection and a heat-safe cool-down zone
Checked 6 days agoOur synthesis3 evidence items

No workmanship or safety guarantee

No setpoint, wattage, cartridge architecture, recovery claim, airflow, vacuum, profile, calibration, ESD mark, software trace, review or owner report guarantees joint quality, pad preservation, repair success, reliability, exposure control or safety. Follow the exact manuals and a validated local process.
Checked 6 days agoOur synthesis5 evidence items

Current verdict

The repeat smd hot-air removal path

FR-810B SMD Hot Air Rework Station. is defensible when its exact package, consumable ecosystem, controls, extraction, service and safety boundaries fit the retained workflow.

Checked 6 days agoOur synthesis10 evidence items
03

Other paths

The alternatives change what the FR-810B SMD Hot Air Rework Station is worth

These are not generic competitors. Each one represents a different way to buy into the same market.

01ownership

Weller

WXR 3032 Rework Station

About $5,200 current U.S. complete-system reference
Best fit
Integrated three-channel hot-air and vacuum rework
Tradeoff
T0053503699N is the 120 V WXR 3032 package with three named tools; WXR3 power unit-only, WXR3030/3031 and 230 V sets have different contents
Open the source
02premium

JBC

DMPSE Complete Rework Station

$4,810 current 120 V complete-system reference
Best fit
Integrated multichannel assembly and through-hole rework
Tradeoff
DMPSE-1QD is the current 120 V QD package with four named tools and electric MSE pump; it is not the discontinued RMSE, the compressed-air DMPVE or a hot-air system, and most cartridges are not included
Open the source
04

What changed

The product has a history

Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.

  1. notable

    Current exact station and evidence retained

    FR-810B SMD Hot Air Rework Station was checked against manufacturer identity and manual, current U.S. price, independent coverage, bounded owner evidence and explicit package, ecosystem, extraction, grounding, software, service and no-outcome boundaries.

Price record

The price history starts here

Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.

  1. $916.77 current U.S. exact-model reference

    Current reference priceA structured timeline will begin with the next source capture

05

Owner experience

What repeats after the purchase

Owner discussion is retained as a checklist for interface clicks, nozzle cost, holder sensing, airflow, pickup, preset chains, cool-down, desk footprint and parts support, not as a workmanship, reliability, exposure or safety rate.

Self-selected reports span different station revisions, voltages, tips, nozzles, boards, alloys, fluxes, extraction, maintenance, settings and operator skill. They cannot prove that another sample, joint or rework process is effective or safe.
SignalWhat owners reportOur readEvidence

interface clicks, nozzle cost, holder sensing, airflow, pickup, preset chains, cool-down, desk footprint and parts support

Operators report both successful work and friction involving interface clicks, nozzle cost, holder sensing, airflow, pickup, preset chains, cool-down, desk footprint and parts support.

Instrument a representative board and validate nozzle, distance, shielding, airflow and time rather than copying a preset or using maximum temperature.

1 evidence record
06

Sources

Why we believe the current view

The page separates what a source states directly from what we conclude across sources.

01
FR-810B SMD Hot Air Rework Station official identity and specificationHakko · identity

Hakko identifies exact model FR810B-05 as an 820 W station with turbine airflow, 50 to 600 °C setpoint, integrated pickup, five presets, chained profiles, holder and heat-resistant pads. FR810B-05 is the 120 V station, handpiece, holder and pickup accessories; Hakko USA states that hot-air nozzles are sold separately, so older bundles are not comparable

Source type
manufacturer
Content hash
bdea6833df489dab…
Use
store excerpt
Open Hakko
02
FR-810B SMD Hot Air Rework Station current U.S. exact-model priceAuthorized U.S. electronics-tool market · price

$916.77 current U.S. exact-model reference is retained for exact model FR810B-05, subject to the stated voltage and package boundary.

Source type
retailer
Content hash
5193fbbbcdd78403…
Use
store snapshot
Open Authorized U.S. electronics-tool market
03
FR-810B SMD Hot Air Rework Station manual and operating limitsHakko · specification

The 120 V station consumes 820 W with a 790 W heater; confirm circuit headroom, grounded cord, holder clearance and cool-down operation The display range is 50 to 600 °C, but nozzle size, distance, airflow, preheat, shielding, board mass and sensor placement determine assembly temperature The current unit uses Hakko's N51 and documented legacy-compatible nozzle path, with each nozzle, pickup pad and heat shield selected for the exact package and access Five temperature, airflow and time presets can be chained as a simple profile; that sequence is not a measured closed-loop board profile and must be validated independently The turbine publishes airflow settings corresponding to roughly 5 to 115 L/min and the handpiece includes pickup vacuum; neither airflow nor pickup indicates solder release or safe lift

Source type
support
Content hash
74509563b486a864…
Use
store excerpt
Open Hakko
04
Hakko support, calibration and service pathHakko · specification

Heater, turbine, handpiece, nozzles, pickup pads and support parts are available, while calibration and airflow verification require a defined service plan

Source type
support
Content hash
545a962ec84a05b9…
Use
store excerpt
Open Hakko
05
Lead exposure from heating and soldering metalNIOSH · specification

NIOSH identifies heating or soldering metal as a possible lead-fume task and emphasizes that fumes and dust can be invisible. Alloy identity, hygiene, exposure assessment and controls remain local responsibilities.

Source type
support
Content hash
2b6e26f7d487045b…
Use
store excerpt
Open NIOSH
06
Electronics soldering flux-fume evaluationNIOSH · consensus

NIOSH's electronics-assembly evaluation identifies flux-fume exposure and recommends ventilation improvements, monitoring and keeping eating, drinking and smoking out of the work area. A bench fan is not proof of effective capture.

Source type
editorial
Content hash
74f16a8b88db59ac…
Use
store excerpt
Open NIOSH
07
FR-810B SMD Hot Air Rework Station independent product or system coverageIndependent electronics tester · specification

Independent coverage examines the exact model or its closest retained system for controls, package, tips, response, workflow or service. Conditions and samples differ, so it cannot establish the display range is 50 to 600 °c, but nozzle size, distance, airflow, preheat, shielding, board mass and sensor placement determine assembly temperature.

Source type
editorial
Content hash
40be6eb0ef5cad5b…
Use
store excerpt
Open Independent electronics tester
08
FR-810B SMD Hot Air Rework Station owner and operator discussionsElectronics technicians and station owners · consensus

Self-selected operators discuss interface clicks, nozzle cost, holder sensing, airflow, pickup, preset chains, cool-down, desk footprint and parts support. Their boards, settings, tips, alloys, fluxes, extraction, maintenance and skill differ and cannot establish workmanship, reliability or safety rates.

Source type
community
Content hash
621f63d9c77a1686…
Use
store excerpt
Open Electronics technicians and station owners
09
WXR 3032 Rework Station comparison alternativeWeller · alternative

WXR 3032 Rework Station represents the integrated three-channel hot-air and vacuum rework branch at About $5,200 current U.S. complete-system reference.

Source type
manufacturer
Content hash
479b76cbc1c61e56…
Use
store excerpt
Open Weller
10
DMPSE Complete Rework Station comparison alternativeJBC · alternative

DMPSE Complete Rework Station represents the integrated multichannel assembly and through-hole rework branch at $4,810 current 120 V complete-system reference.

Source type
manufacturer
Content hash
0edd8f84de659def…
Use
store excerpt
Open JBC

Manufacturer identity, package, specifications and manual or support, a current U.S. price path, independent product or adjacent-system coverage, bounded owner discussion and service access were checked on August 18, 2026. The desk covers complete current or currently supported professional hand-soldering, tweezer, vacuum-desoldering and hot-air rework stations for electronics assembly and repair. Standalone pencil irons without a coherent station path, consumer craft tools, unsupported imports, cosmetic bundles and tip, nozzle or accessory packs counted as products are excluded. Preserve exact station, handpiece, channel and package identity; tip, cartridge, nozzle, filter and consumable ecosystem; input voltage and total power; setpoint, display, calibration, setback and standby behavior; heater and sensor architecture; airflow and nozzle conditions; vacuum maintenance; grounding; software and service. Setpoint, wattage, recovery, airflow, vacuum, ESD, profile, firmware, review and owner evidence never guarantee joint quality, rework outcome, reliability or safety.

Researching another model?

Search the current market