Current price
$1,072.77 current U.S. exact-model reference
Refresh due soonDirect source1 evidence itemConfirm current checkout or quoted price, seller authorization, voltage, package contents, consumables and return rights before paying.
Hakko · FR410-52
FR-410 High-Power Desoldering Station
A self-contained desoldering station with FR-4103 gun handpiece, N61-05 nozzle, holder, maintenance kit, vacuum indicator, presets and filtersMarket statusCurrent 120 V 190 W gun-style vacuum-desoldering stationChecked Aug 18
Reference price$1,072.77 current U.S. exact-model referenceCurrent U.S. reference for exact model FR410-52
Product cyclecurrentRelease history under review
EvidenceWell supported7 publishers · 3 independent
Next full checkAug 25, 2026Price checks run sooner
01
Ready to buy
Confirm every tool, tip and service dependency
The retained reference is $1,072.77 current U.S. exact-model reference. Recheck the exact U.S. voltage, package, included handpieces, tips or nozzles, stands, filters, cords, software, warranty, calibration and return terms before paying.
Buying stageMarket familiarity
02
Current market
The facts that change the ownership choice
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
QuestionCurrent answerFreshnessBasis
Market branch
Through-hole production and repair desoldering
Checked 6 days agoOur synthesis2 evidence itemsExact package and channels
FR410-52 is the 120 V package with the FR-4103 gun, N61-05 nozzle and maintenance parts; the pencil FR410-53 and older handpiece generations are different exact packages
Checked 6 days agoOur synthesis3 evidence itemsInput voltage and total power
The station is 120 VAC, 190 W, while the 24 V FR-4103 handpiece consumes 140 W; use the exact grounded supply and replacement heater
Checked 6 days agoDirect source2 evidence itemsSetpoint, display and thermal boundary
The 330 to 450 °C range and idle stability apply at the N61 system under stated conditions; they do not guarantee complete barrel wetting or protect plated holes
Checked 6 days agoOur synthesis2 evidence itemsTip, nozzle and consumable ecosystem
FR-4103 uses N61 nozzles and a supplied 1.0 mm extended N61-05; bore, pad access and lead diameter determine the appropriate nozzle
Checked 6 days agoOur synthesis3 evidence itemsStandby, profiles and process controls
Three presets, password lockout, vacuum-level display and a short vacuum-delay feature require correct timing, solder wetting and nozzle contact
Checked 6 days agoOur synthesis3 evidence itemsAirflow, vacuum and maintenance
The internal double-cylinder pump, collection chamber, station filters, handpiece filters, cleaning pins and drills need inspection after actual solder loads; suction is not maintenance-free
Checked 6 days agoOur synthesis2 evidence itemsESD and grounding
Hakko publishes less than 2 ohms and 2 mV at the nozzle on an intact grounded system; solder and flux contamination can change that condition
Checked 6 days agoOur synthesis2 evidence itemsFirmware, profiles and access
This station is menu-controlled rather than an app platform; retain parameters and maintenance logs instead of inferring traceability
Checked 6 days agoOur synthesis3 evidence itemsService and calibration
N61 nozzles, filters, heaters, collection parts and authorized service are recurring ownership items, with leaded and lead-free work requiring controlled cleaning and waste handling
Checked 6 days agoOur synthesis3 evidence itemsBurn, fire, lead and flux boundary
Disconnect and cool before opening the chamber, treat captured solder and flux as contaminated waste, use extraction, eye protection and board supports, and never force a blocked nozzle
Checked 6 days agoOur synthesis3 evidence itemsNo workmanship or safety guarantee
No setpoint, wattage, cartridge architecture, recovery claim, airflow, vacuum, profile, calibration, ESD mark, software trace, review or owner report guarantees joint quality, pad preservation, repair success, reliability, exposure control or safety. Follow the exact manuals and a validated local process.
Checked 6 days agoOur synthesis5 evidence itemsCurrent verdict
The through-hole production and repair desoldering path
Checked 6 days agoOur synthesis10 evidence itemsFR-410 High-Power Desoldering Station. is defensible when its exact package, consumable ecosystem, controls, extraction, service and safety boundaries fit the retained workflow.
03
Other paths
The alternatives change what the FR-410 High-Power Desoldering Station is worth
These are not generic competitors. Each one represents a different way to buy into the same market.
01ownership
JBC
DMPSE Complete Rework Station
$4,810 current 120 V complete-system reference- Best fit
- Integrated multichannel assembly and through-hole rework
- Tradeoff
- DMPSE-1QD is the current 120 V QD package with four named tools and electric MSE pump; it is not the discontinued RMSE, the compressed-air DMPVE or a hot-air system, and most cartridges are not included
02premium
Weller
WXR 3032 Rework Station
About $5,200 current U.S. complete-system reference- Best fit
- Integrated three-channel hot-air and vacuum rework
- Tradeoff
- T0053503699N is the 120 V WXR 3032 package with three named tools; WXR3 power unit-only, WXR3030/3031 and 230 V sets have different contents
04
What changed
The product has a history
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
- notable
Current exact station and evidence retained
FR-410 High-Power Desoldering Station was checked against manufacturer identity and manual, current U.S. price, independent coverage, bounded owner evidence and explicit package, ecosystem, extraction, grounding, software, service and no-outcome boundaries.
Price record
The price history starts here
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
- $1,072.77 current U.S. exact-model reference
Current reference priceA structured timeline will begin with the next source capture
05
Owner experience
What repeats after the purchase
Owner discussion is retained as a checklist for n61 nozzle sizing, gun balance, filter and chamber cleaning, clog recovery, vacuum timing, parts cost and pad protection, not as a workmanship, reliability, exposure or safety rate.
Self-selected reports span different station revisions, voltages, tips, nozzles, boards, alloys, fluxes, extraction, maintenance, settings and operator skill. They cannot prove that another sample, joint or rework process is effective or safe.SignalWhat owners reportOur readEvidence
N61 nozzle sizing, gun balance, filter and chamber cleaning, clog recovery, vacuum timing, parts cost and pad protection
Operators report both successful work and friction involving n61 nozzle sizing, gun balance, filter and chamber cleaning, clog recovery, vacuum timing, parts cost and pad protection.
Practice complete cleanout and filter service, then qualify nozzle, preheat, dwell and suction timing on sacrificial plated-through-hole boards.
1 evidence record06
Sources
Why we believe the current view
The page separates what a source states directly from what we conclude across sources.
01FR-410 High-Power Desoldering Station official identity and specificationHakko · identity
Hakko identifies exact model FR410-52 as a self-contained desoldering station with FR-4103 gun handpiece, N61-05 nozzle, holder, maintenance kit, vacuum indicator, presets and filters. FR410-52 is the 120 V package with the FR-4103 gun, N61-05 nozzle and maintenance parts; the pencil FR410-53 and older handpiece generations are different exact packages
- Source type
- manufacturer
- Content hash
- 479f62e0ba7dfae6…
- Use
- store excerpt
02FR-410 High-Power Desoldering Station current U.S. exact-model priceAuthorized U.S. electronics-tool market · price
$1,072.77 current U.S. exact-model reference is retained for exact model FR410-52, subject to the stated voltage and package boundary.
- Source type
- retailer
- Content hash
- a312ac43aed43ee2…
- Use
- store snapshot
03FR-410 High-Power Desoldering Station manual and operating limitsHakko · specification
The station is 120 VAC, 190 W, while the 24 V FR-4103 handpiece consumes 140 W; use the exact grounded supply and replacement heater The 330 to 450 °C range and idle stability apply at the N61 system under stated conditions; they do not guarantee complete barrel wetting or protect plated holes FR-4103 uses N61 nozzles and a supplied 1.0 mm extended N61-05; bore, pad access and lead diameter determine the appropriate nozzle Three presets, password lockout, vacuum-level display and a short vacuum-delay feature require correct timing, solder wetting and nozzle contact The internal double-cylinder pump, collection chamber, station filters, handpiece filters, cleaning pins and drills need inspection after actual solder loads; suction is not maintenance-free
- Source type
- support
- Content hash
- e96c477167055cb1…
- Use
- store excerpt
04Hakko support, calibration and service pathHakko · specification
N61 nozzles, filters, heaters, collection parts and authorized service are recurring ownership items, with leaded and lead-free work requiring controlled cleaning and waste handling
- Source type
- support
- Content hash
- 37e89e0a6e1d0ef0…
- Use
- store excerpt
05Lead exposure from heating and soldering metalNIOSH · specification
NIOSH identifies heating or soldering metal as a possible lead-fume task and emphasizes that fumes and dust can be invisible. Alloy identity, hygiene, exposure assessment and controls remain local responsibilities.
- Source type
- support
- Content hash
- 2b6e26f7d487045b…
- Use
- store excerpt
06Electronics soldering flux-fume evaluationNIOSH · consensus
NIOSH's electronics-assembly evaluation identifies flux-fume exposure and recommends ventilation improvements, monitoring and keeping eating, drinking and smoking out of the work area. A bench fan is not proof of effective capture.
- Source type
- editorial
- Content hash
- 74f16a8b88db59ac…
- Use
- store excerpt
07FR-410 High-Power Desoldering Station independent product or system coverageIndependent electronics tester · specification
Independent coverage examines the exact model or its closest retained system for controls, package, tips, response, workflow or service. Conditions and samples differ, so it cannot establish the 330 to 450 °c range and idle stability apply at the n61 system under stated conditions; they do not guarantee complete barrel wetting or protect plated holes.
- Source type
- editorial
- Content hash
- 4d484235df887355…
- Use
- store excerpt
08FR-410 High-Power Desoldering Station owner and operator discussionsElectronics technicians and station owners · consensus
Self-selected operators discuss n61 nozzle sizing, gun balance, filter and chamber cleaning, clog recovery, vacuum timing, parts cost and pad protection. Their boards, settings, tips, alloys, fluxes, extraction, maintenance and skill differ and cannot establish workmanship, reliability or safety rates.
- Source type
- community
- Content hash
- a383e6ce35d66cad…
- Use
- store excerpt
09DMPSE Complete Rework Station comparison alternativeJBC · alternative
DMPSE Complete Rework Station represents the integrated multichannel assembly and through-hole rework branch at $4,810 current 120 V complete-system reference.
- Source type
- manufacturer
- Content hash
- 0edd8f84de659def…
- Use
- store excerpt
10WXR 3032 Rework Station comparison alternativeWeller · alternative
WXR 3032 Rework Station represents the integrated three-channel hot-air and vacuum rework branch at About $5,200 current U.S. complete-system reference.
- Source type
- manufacturer
- Content hash
- 479b76cbc1c61e56…
- Use
- store excerpt
Manufacturer identity, package, specifications and manual or support, a current U.S. price path, independent product or adjacent-system coverage, bounded owner discussion and service access were checked on August 18, 2026. The desk covers complete current or currently supported professional hand-soldering, tweezer, vacuum-desoldering and hot-air rework stations for electronics assembly and repair. Standalone pencil irons without a coherent station path, consumer craft tools, unsupported imports, cosmetic bundles and tip, nozzle or accessory packs counted as products are excluded. Preserve exact station, handpiece, channel and package identity; tip, cartridge, nozzle, filter and consumable ecosystem; input voltage and total power; setpoint, display, calibration, setback and standby behavior; heater and sensor architecture; airflow and nozzle conditions; vacuum maintenance; grounding; software and service. Setpoint, wattage, recovery, airflow, vacuum, ESD, profile, firmware, review and owner evidence never guarantee joint quality, rework outcome, reliability or safety.
Researching another model?