Next full checkAug 25, 2026Price checks run sooner
01
Ready to buy
Confirm the exact compressor, power and air path
The retained reference is $434 current U.S. exact-model reference. Confirm factory-new compressor, oil and coupler package; hose, filter and tools are not included. Quote compatible hose, plugs, couplers, filter or dryer, tool demand and safe power or outdoor-fuel setup, then reproduce recovery and pressure at the tool inside the return window.
Buying stageMarket familiarity
02
Current market
The facts that change the ownership choice
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
QuestionCurrent answerFreshnessBasis
Current price
$434 current U.S. exact-model reference
Confirm factory-new compressor, oil and coupler package; hose, filter and tools are not included. Confirm live checkout pricing and package before paying.
Refresh due soonDirect source1 evidence item
Market branch
Rugged hand-carried framing and shop crossover
Checked 6 days agoOur synthesis2 evidence items
Exact purchase boundary
Its four-plus CFM and roll cage add jobsite capacity, while 77-pound carry weight, oil service and circuit starting distinguish it from pancakes
Checked 6 days agoOur synthesis4 evidence items
Delivered SCFM at pressure
Makita publishes 4.2 CFM at 90 PSI and 4.8 CFM at 40 PSI with a 130 PSI receiver ceiling
Checked 6 days agoDirect source3 evidence items
Tank, recovery and duty cycle
The twin 4.2-gallon total receiver follows documented cut-in and recovery conditions; low-speed pumping and thermal overload remain protections rather than continuous-duty authorization
Checked 6 days agoOur synthesis2 evidence items
Motor, starting power or fuel
The 120 V motor is listed around 12.3 A, and starting depends on branch voltage, cord gauge, temperature and correct oil
Checked 6 days agoDirect source2 evidence items
Noise and test basis
The retained manufacturer material describes reduced noise from 1,730-RPM operation but does not supply a complete comparable sound test; no dBA outcome is guaranteed
Checked 6 days agoOur synthesis3 evidence items
Portability and weight
Approximately 77 pounds inside a roll cage makes this technically hand carried but often a two-person stair or vehicle move
Checked 6 days agoDirect source3 evidence items
Regulator, gauges and outlets
A regulator, tank and outlet gauges and dual-capacity manifold serve jobsite hose; verify the exact installed coupler count and dynamic pressure
Checked 6 days agoDirect source2 evidence items
Moisture, oil and drain
Maintain pump oil separately from receiver condensate drainage and add filtration or drying for coatings, clean assembly or cold lines
Checked 6 days agoOur synthesis2 evidence items
Hose, coupler and tool-demand match
Four-point-two CFM at 90 PSI supports more intermittent demand than a standard pancake, but exact multi-nailer cadence, impact use and spray work require summed consumption and recovery testing
Checked 6 days agoOur synthesis3 evidence items
Electrical, pressure and service boundary
Use grounded power, correct oil, pressure-rated hose, intact guards and relief components, PPE and bleed-down. Parts and factory service remain available without guaranteed repair time
Checked 6 days agoOur synthesis3 evidence items
Performance and outcome boundary
No horsepower, maximum-pressure, delivered-SCFM, tank, recovery, duty-cycle, sound, tool-count, motor, engine or service statement and no editorial or owner report guarantees universal tool performance, continuous duty, workplace sound, starting, fuel safety, reliability, uptime, finish, productivity or a job outcome in a different circuit, environment, hose system, tool, cadence, maintenance state or operator setup.
Checked 6 days agoOur synthesis4 evidence items
Current verdict
The rugged twin-stack crossover
MAC2400 is the defended twin stack for buyers who accept weight and oil service to gain 4.2-CFM delivery in a protected frame.
Checked 6 days agoOur synthesis9 evidence items
03
Other paths
The alternatives change what the Big Bore 4.2-Gallon Twin Stack is worth
These are not generic competitors. Each one represents a different way to buy into the same market.
01lower upfront
Makita
Big Bore 2.6-Gallon
$299 current U.S. exact-model reference
Best fit
Compact serviceable oil-lubricated jobsite work
Tradeoff
MAC700 offers more airflow than quiet-series peers but adds oil checks, a louder operating character and only 2.6 gallons of reserve
The 6.5-CFM rating leads this corded shortlist but the roughly 88-pound frame, 13.8-A motor, oil upkeep and five-gallon reserve still limit continuous air-hungry tools
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
notable
Exact current compressor, price and support retained
MAC2400 was checked against manufacturer identity, operating literature, support and parts, a current U.S. price, independent testing and bounded owner evidence.
Price record
The price history starts here
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
$434 current U.S. exact-model reference
Current reference priceA structured timeline will begin with the next source capture
05
Owner experience
What repeats after the purchase
Owner and operator discussion repeatedly returns to 77-pound transport, oil service, voltage drop, twin-stack drains and framing recovery rather than horsepower or maximum PSI alone.
These are self-reported experiences from different samples, circuits or fuel states, hoses, tools, rooms, climates, maintenance histories, work rates and skill levels. They identify checks to run and do not establish delivered flow, duty cycle, sound, safety, battery or fuel endurance, tank life, reliability, failure rates, service turnaround, productivity or job outcomes.
SignalWhat owners reportOur readEvidence
77-pound transport, oil service, voltage drop, twin-stack drains and framing recovery
Owners discuss 77-pound transport, oil service, voltage drop, twin-stack drains and framing recovery with mixed setups and outcomes.
Plan the lift and drain access first, then reproduce the busiest tool cadence on the actual extension and branch circuit.
1 evidence record
06
Sources
Why we believe the current view
The page separates what a source states directly from what we conclude across sources.
01
Big Bore 4.2-Gallon Twin Stack official product identityMakita · identity
Makita identifies exact model MAC2400 as a 4.2-gallon oil-lubricated twin-stack compressor delivering 4.2 CFM at 90 PSI with a 2.5 HP low-speed pump. Makita publishes 4.2 CFM at 90 PSI and 4.8 CFM at 40 PSI with a 130 PSI receiver ceiling
$434 current U.S. exact-model reference was retained for the exact current configuration. Confirm factory-new compressor, oil and coupler package; hose, filter and tools are not included
The twin 4.2-gallon total receiver follows documented cut-in and recovery conditions; low-speed pumping and thermal overload remain protections rather than continuous-duty authorization The 120 V motor is listed around 12.3 A, and starting depends on branch voltage, cord gauge, temperature and correct oil A regulator, tank and outlet gauges and dual-capacity manifold serve jobsite hose; verify the exact installed coupler count and dynamic pressure Maintain pump oil separately from receiver condensate drainage and add filtration or drying for coatings, clean assembly or cold lines
MAC2400 manufacturer support and serviceMakita · specification
Use grounded power, correct oil, pressure-rated hose, intact guards and relief components, PPE and bleed-down. Parts and factory service remain available without guaranteed repair time Support eligibility, warranty terms and turnaround remain exact-model, serial, seller and region dependent.
The manufacturer retains a parts or service-parts route for MAC2400; live availability, substitutions, tank eligibility, labor and repair economics must be confirmed before relying on it.
Makita MAC2400 hands-on jobsite and shop testBob Vila · specification
Independent editorial or trade testing places MAC2400 in a bounded configuration and work pattern. The retained manufacturer material describes reduced noise from 1,730-RPM operation but does not supply a complete comparable sound test; no dBA outcome is guaranteed The result cannot be generalized to another sample, room, circuit, hose, tool, cadence, temperature or operator.
MAC2400 current owner discussionsCompressor owners and operators · consensus
Self-selected owners discuss 77-pound transport, oil service, voltage drop, twin-stack drains and framing recovery. Reports vary by sample, circuit or fuel, hose, tool, maintenance, climate, room and workload and do not establish a performance, sound, safety, failure or reliability rate.
Manufacturer identity, exact manuals, support, parts or service routes, a current U.S. exact-model price, independent editorial or trade testing and bounded owner/operator discussion were checked on August 18, 2026. This desk covers complete, currently supported portable reciprocating jobsite and shop air-compressor systems with a receiver, motor or engine, controls and outlet. It excludes tire inflators, bare pumps, tank-only products, stationary vertical receivers, unsupported marketplace models, compressor accessories and industrial rotary-screw plants. Delivered SCFM must remain paired with pressure; tank volume, cut-in, cut-out, recovery, duty cycle, motor starting, fuel and outdoor ventilation, sound-test basis, weight, regulator, outlets, condensate, hose, couplers and exact tool demand remain configuration and condition dependent. Gasoline units are outdoor-only because carbon monoxide, fuel and hot-exhaust hazards cannot be ventilated away inside a building. No specification, test or owner report guarantees tool performance, continuous duty, sound at a listener, reliability, service time, safety or a job outcome. Confirm the exact nameplate, manual, circuit or outdoor engine setup, ASME status where required, hose and fitting pressure, tool literature, seller, warranty and return rights before use.