Everlast · Lightning MTS 275 TIG Package
Ready to buy
The retained reference is $2,350 current independent U.S. non-P TIG-package reference. Confirm non-P versus MTS-P identity, included torch, required cooler, cart, gun and warranty shipping before checkout. Confirm the current configuration, included parts, support path, return terms and the work that must be preserved before ordering.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Confirm non-P versus MTS-P identity, included torch, required cooler, cart, gun and warranty shipping before checkout. Confirm the checkout price and package before paying.
Choose the Lightning 275 when AC/DC TIG, 12-inch spools and push-pull readiness matter and the buyer can manage its package, cooling and direct-service boundaries.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
Everlast
HTP America
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
Lightning MTS 275 was checked against its manufacturer record, the current category collection and the nearest ownership alternatives.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner discussion repeatedly returns to non-p versus p identity, cooler requirement, push-pull setup, 12-inch spool, duty cycle and direct-service logistics rather than specifications alone.
These are self-reported experiences from a changing mix of owners, conditions and software versions. They identify questions to test, not a failure rate. Skill, procedure, input circuit, material, consumable, shielding gas, joint, environment, ventilation, maintenance and local service vary materially.Owners discuss the 275's capability, package and direct-support tradeoffs. The bounded thread is not a failure-rate or weld-quality sample.
Treat owner experience as a checklist for package and support verification, not a reliability or maximum-output rate.
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Everlast identifies Lightning MTS 275 as a 120/240 V MIG, flux-core, stick and AC/DC TIG machine with pulsed TIG, 12-inch spool capacity and push-pull readiness
Arc-Zone lists the non-P Lightning MTS 275 TIG package at $2,350; cooler, cart, cylinders, gases and process consumables require exact confirmation.
Everlast publishes setup, compatibility or service material that makes this purchase boundary explicit: This is the non-P version with pulsed TIG but not pulsed MIG; the water-cooled torch package can still require a separately purchased cooler and cart. Arc welding can cause fatal electric shock, arc-flash and ultraviolet eye or skin injury, burns, fire or explosion, compressed-gas injury and hazardous fume exposure. A qualified electrician must size the receptacle, branch circuit, grounding, disconnect, extension lead and generator from the exact rating label and manual; 120/240 V capability is not permission to use an adapter or undersized circuit. Inspect leads and insulation, keep the work area and operator dry, de-energize before service and use the exact manual's lockout and discharge procedure. Select helmet shade, eye, face, hearing, hand, body and respiratory protection from the actual process, current, task and hazard assessment, and screen bystanders from the arc. Identify base metal, coatings, filler, flux, cleaners and SDS hazards; keep the head out of the plume and use effective local exhaust or a formal respiratory program where required. Outdoor or open-door work does not prove adequate ventilation, and oxygen must never be used for ventilation. Remove or protect combustibles, inspect concealed spaces and use the required hot-work permit and fire watch. Secure cylinders upright, protect valves and use the correct gas, regulator, hose and leak test. Implanted-device users must consult the device maker and clinician and follow the machine manual's EMF cable-routing guidance; no universal safe distance is asserted. Presets, synergic programs, pulse modes and software do not qualify an operator, welding procedure, code weld, structural repair or safety-critical repair. Duty cycle and output are process-, voltage-, phase- and temperature-specific, so maximum amperage alone is not a performance ranking.
The current U.S. dealer market distinguishes machine-only SKUs from TIG, cart, educational, spool-gun and push-pull packages and publishes current prices before rebates, tax and separately purchased safety systems.
An independent working sculptor demonstrates the 275 platform in an actual flux-core workflow; that task-specific account does not rank all processes or later revisions.
OSHA identifies metal fumes, UV radiation, burns, eye damage, electrical shock and fire among welding hazards; NIOSH states that plume composition and exposure vary with process, consumable, base metal and coatings and supports effective ventilation controls.
Owners discuss the 275's capability, package and direct-support tradeoffs. The bounded thread is not a failure-rate or weld-quality sample.
Lightning MTS 225 represents the value dual-voltage ac/dc tig all-process package branch at $2,199 current independent U.S. TIG-package reference.
Revolution 2500 represents the full-process pulse-mig and ac/dc tig fabrication flagship branch at $3,799 current independent U.S. steel-package reference.
The manufacturer record, current market collection, support material and independent category evidence were checked on August 17, 2026. The checkout package and regional support path still need verification. Owner reports are retained as bounded experience, not a reliability rate. Arc welding can cause fatal electric shock, arc-flash and ultraviolet eye or skin injury, burns, fire or explosion, compressed-gas injury and hazardous fume exposure. A qualified electrician must size the receptacle, branch circuit, grounding, disconnect, extension lead and generator from the exact rating label and manual; 120/240 V capability is not permission to use an adapter or undersized circuit. Inspect leads and insulation, keep the work area and operator dry, de-energize before service and use the exact manual's lockout and discharge procedure. Select helmet shade, eye, face, hearing, hand, body and respiratory protection from the actual process, current, task and hazard assessment, and screen bystanders from the arc. Identify base metal, coatings, filler, flux, cleaners and SDS hazards; keep the head out of the plume and use effective local exhaust or a formal respiratory program where required. Outdoor or open-door work does not prove adequate ventilation, and oxygen must never be used for ventilation. Remove or protect combustibles, inspect concealed spaces and use the required hot-work permit and fire watch. Secure cylinders upright, protect valves and use the correct gas, regulator, hose and leak test. Implanted-device users must consult the device maker and clinician and follow the machine manual's EMF cable-routing guidance; no universal safe distance is asserted. Presets, synergic programs, pulse modes and software do not qualify an operator, welding procedure, code weld, structural repair or safety-critical repair. Duty cycle and output are process-, voltage-, phase- and temperature-specific, so maximum amperage alone is not a performance ranking. AC TIG and aluminum MIG through a spool or push-pull gun are different process paths. Pulse is always identified as pulsed MIG, pulsed DC TIG, pulsed AC TIG, double-pulsed MIG or pulsed stick where applicable. No record promises universal penetration, bead appearance, receiver-like rankings from maximum amps, code acceptance, procedure qualification, reliability incidence or a safe circuit without label-based installation.
Researching another model?