FLEX · FX7221-1J
Ready to buy
The retained reference is $799 current independent U.S. FX7221-1J kit reference. Add the optional stand or AC adapter only after verifying exact compatibility; extraction and support remain separate. Confirm the current configuration, included parts, support path, return terms and the work that must be preserved before ordering.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Add the optional stand or AC adapter only after verifying exact compatibility; extraction and support remain separate. Confirm the checkout price and package before paying.
Choose FX7221-1J when a cordless 10-inch blade, documented dado path and large rack fence matter more than included stand mobility or compact weight.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
Milwaukee
Bosch
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
24V 10-Inch Table Saw Stacked Lithium Kit was checked against its manufacturer record, the current category collection and the nearest ownership alternatives.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner discussion repeatedly returns to cutsense behavior, battery and ac-adapter choice, stand cost, 10-inch blade and dado setup rather than specifications alone.
These are self-reported experiences from a changing mix of owners, conditions and software versions. They identify questions to test, not a failure rate. Blade, fence alignment, stock, cut, stand, circuit, extraction, maintenance, battery and operator practice vary materially.Owners discuss the exact 10-inch FLEX saw, batteries, adapter and stand. This bounded record is not a durability or accuracy rate.
Reports help check the new platform's package and handling, not cut accuracy, safety or long-term failure incidence.
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
FLEX identifies 24V 10-Inch Table Saw Stacked Lithium Kit as a 24 V cordless 10-inch saw kit with 10 Ah Stacked Lithium battery, charger, 30-1/2-inch fence and CutSense blade-stop mode
Acme Tools lists FX7221-1J at $799 as the 10-inch Stacked Lithium kit; stand and AC-adapter bundles are separately identified.
FLEX publishes setup, compatibility or service material that makes this purchase boundary explicit: FX7221-1J includes one battery and charger but no stand or optional AC adapter; CutSense is a post-cut blade stop and not skin sensing. A table saw can cause amputation, laceration, impact, entanglement, electric-shock, fire, noise and wood-dust injury. Read the exact saw and blade manuals. Verify blade diameter, arbor or bore, plate thickness, kerf, maximum RPM, rotation and riving-knife and guard compatibility; a blade fitting the arbor alone is not compatible. Use a dado only when the exact manual permits the exact diameter and maximum width, with the required insert, riving-knife or guarding procedure and, for SawStop, the correct dado cartridge. Disconnect mains power or remove the battery and follow the manual before blade, insert, fence, alignment, clearing or service work, and wait for the blade to stop. Lock the saw on a stable level stand or base, support long and wide stock, keep people out of the line of fire, inspect stock for metal and instability, and never cut freehand. Use the rip fence, miter gauge, push stick, push block, featherboard and other fixtures exactly as the cut and manual require; never combine the fence and miter gauge in a binding setup. A guard, riving knife or anti-kickback pawl reduces some risks only when correctly aligned and used and does not prevent kickback. An ordinary electric brake or CutSense stops or coasts the blade after switch-off or cut completion and is not skin sensing. SawStop's conductivity-based Active Injury Mitigation has material, bypass, blade, cartridge, gap and operating conditions and does not prevent contact, every injury or kickback. Wood dust varies by species, coating, cut and collector; connect the documented port and effective extraction, and select eye, hearing and respiratory controls from the actual exposure assessment. A qualified person must verify the exact 120 V circuit, grounding or GFCI conditions and extension-cord limits; cordless systems require the exact compatible battery and charger and damaged-lithium handling. OSHA 29 CFR 1910.213 is a workplace rule, not proof that a product complies for a particular workplace. No catalog fact promises accuracy, cut quality, kickback prevention, injury prevention or regulatory compliance.
The current U.S. dealer market separates saw-only, battery kit, folding-stand, rolling-stand and accessory SKUs. Prices cannot be compared without retaining those contents.
Independent category testing places the exact FLEX system against jobsite peers and distinguishes CutSense from a safety brake; claims remain test-conditioned.
NIOSH identifies substantial table-saw wood-dust generation and limitations of lower collection alone; actual controls depend on machine, hood, airflow, material and exposure.
Owners discuss the exact 10-inch FLEX saw, batteries, adapter and stand. This bounded record is not a durability or accuracy rate.
M18 FUEL 8-1/4-Inch Table Saw Kit represents the cordless ecosystem kit carry saw branch at $749 current independent U.S. 2736-21HD kit reference.
10-Inch Portable Jobsite Table Saw represents the rolling jobsite saw with convenience brake branch at $649 current independent U.S. GTS15-10 reference.
OSHA 29 CFR 1910.213 sets workplace woodworking-machinery guarding and operating requirements. It does not certify this saw, a particular cut or a particular workplace as compliant.
The manufacturer record, current market collection, support material and independent category evidence were checked on August 17, 2026. The checkout package and regional support path still need verification. Owner reports are retained as bounded experience, not a reliability rate. A table saw can cause amputation, laceration, impact, entanglement, electric-shock, fire, noise and wood-dust injury. Read the exact saw and blade manuals. Verify blade diameter, arbor or bore, plate thickness, kerf, maximum RPM, rotation and riving-knife and guard compatibility; a blade fitting the arbor alone is not compatible. Use a dado only when the exact manual permits the exact diameter and maximum width, with the required insert, riving-knife or guarding procedure and, for SawStop, the correct dado cartridge. Disconnect mains power or remove the battery and follow the manual before blade, insert, fence, alignment, clearing or service work, and wait for the blade to stop. Lock the saw on a stable level stand or base, support long and wide stock, keep people out of the line of fire, inspect stock for metal and instability, and never cut freehand. Use the rip fence, miter gauge, push stick, push block, featherboard and other fixtures exactly as the cut and manual require; never combine the fence and miter gauge in a binding setup. A guard, riving knife or anti-kickback pawl reduces some risks only when correctly aligned and used and does not prevent kickback. An ordinary electric brake or CutSense stops or coasts the blade after switch-off or cut completion and is not skin sensing. SawStop's conductivity-based Active Injury Mitigation has material, bypass, blade, cartridge, gap and operating conditions and does not prevent contact, every injury or kickback. Wood dust varies by species, coating, cut and collector; connect the documented port and effective extraction, and select eye, hearing and respiratory controls from the actual exposure assessment. A qualified person must verify the exact 120 V circuit, grounding or GFCI conditions and extension-cord limits; cordless systems require the exact compatible battery and charger and damaged-lithium handling. OSHA 29 CFR 1910.213 is a workplace rule, not proof that a product complies for a particular workplace. No catalog fact promises accuracy, cut quality, kickback prevention, injury prevention or regulatory compliance.
Researching another model?