Fluke · 87V MAX
Ready to buy
The retained reference is $729.99 current U.S. street reference. Confirm standard or CAL package, sealing condition, included TL175 leads, clips and temperature probe, and avoid open-box units with unknown gasket or fuse history. Verify the exact package and category markings, inspect every input, prove operation on known sources and document calibration status before field use.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Confirm standard or CAL package, sealing condition, included TL175 leads, clips and temperature probe, and avoid open-box units with unknown gasket or fuse history. Confirm current checkout or quoted price, seller authorization, calibration option and return rights before paying.
87V MAX is coherent when the 87V measurement set is needed in wet, dusty or high-drop field work and the buyer will preserve seals, approved leads, fuses and service rather than treating IP67 as an electrical-safety guarantee.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
Fluke
Hioki
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
87V MAX was checked against current manufacturer identity and support, a U.S. price path, calibration or service, product-specific independent coverage and bounded owner evidence.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner discussion is retained as a checklist for seal care, bulk, aa runtime, lead storage, cold or wet handling, filter use and calibration service, not as a safety, accuracy, reliability or failure rate.
These self-selected reports span different serials, ages, circuits, signals, environments, leads, fuses, calibration states, software and operator skill. They cannot prove that another meter is accurate, suitable or safe.Owners report both successful use and friction involving seal care, bulk, aa runtime, lead storage, cold or wet handling, filter use and calibration service.
Inspect seals and leads, test after any severe drop, and rehearse battery and fuse replacement before deciding that the environmental premium fits the actual field exposure.
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Fluke identifies model 87V MAX as a sealed AA-powered variant of the 87V measurement platform with IP67 construction, a published four-meter drop test, True RMS, a drive low-pass filter and temperature. CAT III 1000 V and CAT IV 600 V markings remain limited by terminal, lead, fuse and manual boundaries; IP67 and the four-meter drop test are environmental durability claims, not higher transient protection
$729.99 current U.S. street reference is retained for the exact model under the stated package and seller qualifications. Confirm standard or CAL package, sealing condition, included TL175 leads, clips and temperature probe, and avoid open-box units with unknown gasket or fuse history
True RMS AC and low-pass drive measurement are bounded by frequency, crest factor, signal level and the selected filter; the meter cannot validate a drive waveform or replace an oscilloscope Three AA batteries support the longer published runtime; opening the sealed compartment requires de-energizing, removing all leads and following the gasket, battery and exact high-energy-fuse procedure The package includes TL175 TwistGuard leads, AC175 clips, 80BK-A probe, removable holster and three AA cells; the exposed-tip setting and accessory markings control where the assembly may be used
A model-specific calibration manual and Fluke service path support periodic verification, but an IP seal after repair, calibration traceability and turnaround must be confirmed on the service order
Electrical work around exposed energized parts requires hazard assessment, qualified-person boundaries, de-energization where feasible and appropriate work practices and protective equipment. A meter does not authorize or make live work safe.
Professional meter use requires the correct category-rated instrument and leads, inspected equipment, the right terminals and functions, intact fuses and a known-live verification process. These controls apply across brands without endorsing one model.
Product-specific coverage examines 87V MAX controls, functions, response, display, input protection or teardown and value under the reviewer's stated bench or field conditions. It cannot certify another sample or high-energy use.
Self-selected owners discuss seal care, bulk, aa runtime, lead storage, cold or wet handling, filter use and calibration service. Reports span different samples, ages, calibration states, circuits, leads, fuses and skill levels and cannot establish safety, accuracy or failure rates.
87V Industrial Multimeter represents the industrial drives and broad field troubleshooting branch at $529.99 current U.S. street reference.
DT4282 represents the high-accuracy lab and industrial field measurement branch at $634 current U.S. authorized price.
Manufacturer identity and specifications, model-level manual or support, a current U.S. price path, calibration or service access, product-specific independent review and bounded owner discussion were checked on August 17, 2026. This desk covers current or currently supported complete handheld and bench-portable digital multimeters for professional electrical, electronics, HVAC, automotive, industrial and serious lab or field use. Clamp meters as the primary instrument, basic consumer testers, standalone oscilloscopes, process calibrators, cosmetic bundles, used-only and unsupported models are excluded. CAT ratings apply only at the marked category and voltage with correct inputs, leads, probes, tip guards, fuses, procedures and environment. True RMS, bandwidth, crest factor, counts, accuracy, range, resolution, LoZ, low-pass, temperature, continuity, logging, software and battery claims remain conditional. No record authorizes hazardous live work, selects PPE, replaces a qualified person, diagnoses equipment or guarantees safety or outcome.
Researching another model?