Fluke · 87V
Ready to buy
The retained reference is $529.99 current U.S. street reference. Confirm the standard meter rather than a kit, calibration option, refurbished unit or 87V MAX, and recheck seller authorization and included TL75 leads. Verify the exact package and category markings, inspect every input, prove operation on known sources and document calibration status before field use.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Confirm the standard meter rather than a kit, calibration option, refurbished unit or 87V MAX, and recheck seller authorization and included TL75 leads. Confirm current checkout or quoted price, seller authorization, calibration option and return rights before paying.
87V remains the defended all-round industrial choice when a fast continuity response, drive-oriented low-pass filter, temperature and serviceable high-energy input protection matter more than logging or a sealed enclosure.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
Fluke
Fluke
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
87V Industrial Multimeter was checked against current manufacturer identity and support, a U.S. price path, calibration or service, product-specific independent coverage and bounded owner evidence.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner discussion is retained as a checklist for continuity speed, low-pass behavior, lead quality, fuse cost, switch wear, battery life and calibration history, not as a safety, accuracy, reliability or failure rate.
These self-selected reports span different serials, ages, circuits, signals, environments, leads, fuses, calibration states, software and operator skill. They cannot prove that another meter is accurate, suitable or safe.Owners report both successful use and friction involving continuity speed, low-pass behavior, lead quality, fuse cost, switch wear, battery life and calibration history.
Prove the exact input, filter, lead and fuse routine on a known safe source and calibration standard before using the meter for a consequential live-work decision.
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Fluke identifies model 87V as a 6,000-count industrial handheld with a 20,000-count high-resolution mode, True RMS AC measurement, selectable low-pass filter, temperature and fast Min/Max capture. The meter is rated CAT III 1000 V and CAT IV 600 V only within its marked terminals, specified leads, intact 440 mA and 11 A 1000 V high-energy fuses and manual limits; a category mark is not permission to work live
$529.99 current U.S. street reference is retained for the exact model under the stated package and seller qualifications. Confirm the standard meter rather than a kit, calibration option, refurbished unit or 87V MAX, and recheck seller authorization and included TL75 leads
True RMS AC voltage and current, a drive low-pass mode and specified AC bandwidth remain frequency, crest-factor, range and signal-level dependent; low-pass results are not interchangeable with unfiltered readings A replaceable 9 V battery powers the meter; battery and both current-input fuses must be checked with the manual procedure after de-energizing and removing leads before the case is opened The standard package includes the meter, holster, TL75 lead set, AC175 clips, 80BK temperature probe and battery; probe category, exposed-tip length and accessory rating can reduce the complete assembly rating
Fluke publishes a calibration manual and authorized service route; the limited lifetime warranty is not an accredited calibration, and the owner must set an interval and required traceability for the work
Electrical work around exposed energized parts requires hazard assessment, qualified-person boundaries, de-energization where feasible and appropriate work practices and protective equipment. A meter does not authorize or make live work safe.
Professional meter use requires the correct category-rated instrument and leads, inspected equipment, the right terminals and functions, intact fuses and a known-live verification process. These controls apply across brands without endorsing one model.
Product-specific coverage examines 87V Industrial Multimeter controls, functions, response, display, input protection or teardown and value under the reviewer's stated bench or field conditions. It cannot certify another sample or high-energy use.
Self-selected owners discuss continuity speed, low-pass behavior, lead quality, fuse cost, switch wear, battery life and calibration history. Reports span different samples, ages, calibration states, circuits, leads, fuses and skill levels and cannot establish safety, accuracy or failure rates.
179 True RMS Multimeter represents the general industrial and field-service measurement branch at $494.99 current U.S. street reference.
289 True RMS Logging Multimeter represents the long-duration logging and intermittent industrial faults branch at $839.99 current U.S. street reference.
Manufacturer identity and specifications, model-level manual or support, a current U.S. price path, calibration or service access, product-specific independent review and bounded owner discussion were checked on August 17, 2026. This desk covers current or currently supported complete handheld and bench-portable digital multimeters for professional electrical, electronics, HVAC, automotive, industrial and serious lab or field use. Clamp meters as the primary instrument, basic consumer testers, standalone oscilloscopes, process calibrators, cosmetic bundles, used-only and unsupported models are excluded. CAT ratings apply only at the marked category and voltage with correct inputs, leads, probes, tip guards, fuses, procedures and environment. True RMS, bandwidth, crest factor, counts, accuracy, range, resolution, LoZ, low-pass, temperature, continuity, logging, software and battery claims remain conditional. No record authorizes hazardous live work, selects PPE, replaces a qualified person, diagnoses equipment or guarantees safety or outcome.
Researching another model?