Fluke · 116
Ready to buy
The retained reference is $289.99 current U.S. street reference. Confirm included 80BK probe, standard or CAL package and whether the job also requires a separate clamp meter, manometer, combustion analyzer or rated clips. Verify the exact package and category markings, inspect every input, prove operation on known sources and document calibration status before field use.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Confirm included 80BK probe, standard or CAL package and whether the job also requires a separate clamp meter, manometer, combustion analyzer or rated clips. Confirm current checkout or quoted price, seller authorization, calibration option and return rights before paying.
116 is the defended HVAC route when K-type temperature, DC microamps and LoZ are central and direct high-current measurement, logging or wider industrial category ratings are not.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
Fluke
IDEAL
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
116 HVAC Multimeter was checked against current manufacturer identity and support, a U.S. price path, calibration or service, product-specific independent coverage and bounded owner evidence.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner discussion is retained as a checklist for flame-sensor microamps, k-type probe error, loz loading, capacitance speed, missing amp input and companion-tool needs, not as a safety, accuracy, reliability or failure rate.
These self-selected reports span different serials, ages, circuits, signals, environments, leads, fuses, calibration states, software and operator skill. They cannot prove that another meter is accurate, suitable or safe.Owners report both successful use and friction involving flame-sensor microamps, k-type probe error, loz loading, capacitance speed, missing amp input and companion-tool needs.
Verify the microamp and temperature channels with known references and perform the equipment maker's complete diagnostic sequence before replacing a control or declaring a system safe.
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Fluke identifies model 116 as a 6,000-count HVAC-focused handheld with True RMS, temperature, flame-sensor microamps, capacitance, frequency and Auto-V LoZ. The 116 is rated CAT III 600 V with the stated terminals and accessories; the microamp jack, temperature adapter and probe do not inherit a higher voltage category from the meter body
$289.99 current U.S. street reference is retained for the exact model under the stated package and seller qualifications. Confirm included 80BK probe, standard or CAL package and whether the job also requires a separate clamp meter, manometer, combustion analyzer or rated clips
True RMS voltage and current readings have frequency and crest boundaries; LoZ deliberately loads the circuit and should not be used where that loading can alter sensitive controls A 9 V battery powers the meter; the exact input design and battery procedure in the shared safety sheet must be followed with all leads removed before opening The standard kit includes test leads, 80BK integrated temperature probe, holster, installed battery and manual; probe temperature range, surface contact and electrical isolation remain separate limits
The shared calibration manual covers voltage, resistance, capacitance, frequency, temperature and microamp verification; calibration and 80BK probe status should be retained separately
Electrical work around exposed energized parts requires hazard assessment, qualified-person boundaries, de-energization where feasible and appropriate work practices and protective equipment. A meter does not authorize or make live work safe.
Professional meter use requires the correct category-rated instrument and leads, inspected equipment, the right terminals and functions, intact fuses and a known-live verification process. These controls apply across brands without endorsing one model.
Product-specific coverage examines 116 HVAC Multimeter controls, functions, response, display, input protection or teardown and value under the reviewer's stated bench or field conditions. It cannot certify another sample or high-energy use.
Self-selected owners discuss flame-sensor microamps, k-type probe error, loz loading, capacitance speed, missing amp input and companion-tool needs. Reports span different samples, ages, calibration states, circuits, leads, fuses and skill levels and cannot establish safety, accuracy or failure rates.
117 Electrician's Multimeter represents the commercial electrical troubleshooting with loz branch at $294.99 current U.S. street reference.
61-347 represents the accessible electrical service with visible hazard cues branch at About $129 current U.S. retail reference.
Manufacturer identity and specifications, model-level manual or support, a current U.S. price path, calibration or service access, product-specific independent review and bounded owner discussion were checked on August 17, 2026. This desk covers current or currently supported complete handheld and bench-portable digital multimeters for professional electrical, electronics, HVAC, automotive, industrial and serious lab or field use. Clamp meters as the primary instrument, basic consumer testers, standalone oscilloscopes, process calibrators, cosmetic bundles, used-only and unsupported models are excluded. CAT ratings apply only at the marked category and voltage with correct inputs, leads, probes, tip guards, fuses, procedures and environment. True RMS, bandwidth, crest factor, counts, accuracy, range, resolution, LoZ, low-pass, temperature, continuity, logging, software and battery claims remain conditional. No record authorizes hazardous live work, selects PPE, replaces a qualified person, diagnoses equipment or guarantees safety or outcome.
Researching another model?