Mysa · AC-V1-0
Ready to buy
The retained reference is $139 current U.S. direct price. Every independently controlled head needs its own powered unit; a USB outlet and supported remote code are required. Verify every terminal, transformer, stage, auxiliary transition, local control, account transfer and return or installer-service term before purchase.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Every independently controlled head needs its own powered unit; a USB outlet and supported remote code are required. Confirm current stock, authorized U.S. seller, included hardware, tax, shipping, return rights and installation before paying.
Mysa Mini-Split is defended when its code library reproduces every needed remote command and the buyer accepts IR state and cloud-service limits.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
Cielo WiGle
Sensibo
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
Smart Thermostat for Mini-Splits was checked against exact identity and support, current U.S. price, topology, stages, power, heat-pump, sensors, app, offline, demand-response, installation, service and outcome boundaries, independent decision evidence and bounded owner or installer reports.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner and installer discussion returns to remote-code coverage, celsius and fahrenheit synchronization, usb placement, climate+ behavior and support rather than a universal comfort, savings or reliability result.
These are self-reported experiences from different HVAC equipment, wiring, transformers, zones, homes, climates, setpoints, tariffs, networks, firmware, apps, utility programs, installers and maintenance histories. They identify checks to run and do not establish comfort, savings, temperature accuracy, air quality, fault diagnosis, safety, freeze protection, reliability or failure rates.Owners and installers discuss remote-code mismatches, Celsius and Fahrenheit state, USB placement, temperature control, Wi-Fi and support. Reports are self-selected.
Run every remote function from both Mysa and the native remote, then decide which control owns state and store the original remote for recovery.
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Mysa identifies AC-V1-0 as a Wi-Fi controller that sends infrared commands to one compatible mini-split, window or portable air conditioner and adds room sensing and app schedules.
$139 current U.S. direct price was retained for AC-V1-0. Every independently controlled head needs its own powered unit; a USB outlet and supported remote code are required
One-way infrared retrofit for an air conditioner or heat pump that already uses an IR remote; no direct 24 V, line-voltage, proprietary bus or dry-contact control The native appliance decides compressor modulation, stages and fan logic after receiving a remote-like command; Mysa does not expose conventional Y, W, G or O/B stages Heating, cooling, dry, fan, swing and setpoint support are limited to what the selected remote code reproduces; dual-fuel and central auxiliary heat are outside scope Requires continuous plug-in USB power, 2.4 GHz Wi-Fi and unobstructed IR placement within the documented range Measures room temperature and humidity and can issue commands for one head; multiple units are separate and cannot resolve shared-outdoor-unit mode conflicts by themselves
Mysa account, app, Wi-Fi, geofencing, integrations, schedules and usage estimates create device, location and service-data dependencies Wall controls can send retained IR commands while powered, but remote control, fresh automation, reports, geofence and integrations need service; the original remote can desynchronize assumed state Two-year limited warranty terms apply. An IR command, room reading or Climate+ routine cannot guarantee state synchronization, comfort, savings, capacity, condensate safety or equipment life
Certified connected thermostats must retain basic thermostat operation without service-provider connectivity, support schedules and report energy-use information; certification is not a household comfort or savings guarantee.
EPA directs buyers to match HVAC type, voltage, wires, variable speed, stages and zoning before purchase and notes that line-voltage and complex systems often require specialized controls or professional installation.
Heat-pump performance depends on the complete equipment and controls; thermostat stage or app labels do not establish capacity, auxiliary-heat economics, dual-fuel operation or delivered comfort.
FTC consumer guidance covers router security, unique passwords, updates and privacy settings for connected devices; cloud convenience does not remove household security and access duties.
Hands-on review covers exact-product setup, IR learning, schedules, heating and cooling control and ownership limits.
Owners and installers discuss remote-code mismatches, Celsius and Fahrenheit state, USB placement, temperature control, Wi-Fi and support. Reports are self-selected.
Cielo Breez Max is the full-display mini-split infrared retrofit defended alternative at $122.88 current U.S. retail price.
Sensibo Air PRO is the compact mini-split ir control with iaq context defended alternative at $129 current U.S. direct sale price.
Manufacturer identity, exact product or support documentation, current U.S. price, independent decision evidence and bounded owner or installer evidence were checked on August 19, 2026. This desk covers complete current U.S.-supported residential thermostat and HVAC-control systems where conventional low-voltage relays, proprietary communicating control, line-voltage electric heat, radiant-floor control or mini-split infrared retrofit materially changes the decision. It excludes bare sensors, faceplates, cosmetic finishes, multipacks, dealer software licenses, unsupported prior generations, portable-heater controls and smoke or carbon-monoxide life-safety alarms. Voltage, transformer, terminals, stages, heat-pump, auxiliary, emergency-heat, dual-fuel, proprietary-bus, accessory, zoning and sensor limits are exact-model facts. A room sensor can influence one equipment zone without creating duct zoning. Mini-split IR controllers can miss commands or lose state when the native remote is used and cannot override shared-outdoor-unit mode limits. Local wall control and stored schedules differ from app, voice, weather, geofence, history, firmware and demand-response services that require accounts, cloud and connectivity. Demand-response enrollment is voluntary and utility-specific. Turn off equipment power and use a qualified HVAC technician or electrician for uncertain low-voltage, communicating, dual-transformer, line-voltage, wet-area or multi-equipment work. Compressor delays, balance points, stage timing, O/B, fan, fuel and dual-fuel settings must match the equipment manual. Alerts, temperature, humidity, TVOC and CO2-equivalent readings are not equipment diagnosis, source identification, health diagnosis or safety clearance and do not replace smoke and CO alarms. No thermostat or control guarantees comfort, even rooms, energy savings, utility rewards, freeze protection, equipment life, fault prevention or uninterrupted service.
Researching another model?