Mysa · MYSA-V2-0
Ready to buy
The retained reference is $159 current U.S. direct price. Every independently controlled room or circuit needs its own compatible thermostat; gang work, rewiring and additional units are separate. Verify every terminal, transformer, stage, auxiliary transition, local control, account transfer and return or installer-service term before purchase.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Every independently controlled room or circuit needs its own compatible thermostat; gang work, rewiring and additional units are separate. Confirm current stock, authorized U.S. seller, included hardware, tax, shipping, return rights and installation before paying.
Mysa V2 is defended for compatible line-voltage electric heat when a qualified electrician confirms circuit, load and conductor topology and the household values room-by-room app control.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
Mysa
Bosch Home Comfort
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
Smart Thermostat for Electric Baseboard Heaters V2 was checked against exact identity and support, current U.S. price, topology, stages, power, heat-pump, sensors, app, offline, demand-response, installation, service and outcome boundaries, independent decision evidence and bounded owner or installer reports.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner and installer discussion returns to line-voltage conductor fit, circuit load, temperature offset, app, reports and support rather than a universal comfort, savings or reliability result.
These are self-reported experiences from different HVAC equipment, wiring, transformers, zones, homes, climates, setpoints, tariffs, networks, firmware, apps, utility programs, installers and maintenance histories. They identify checks to run and do not establish comfort, savings, temperature accuracy, air quality, fault diagnosis, safety, freeze protection, reliability or failure rates.Exact-product purchasers discuss conductor fit, heat load, temperature readings, app, energy reports and support. Manufacturer-hosted reports are self-selected.
Have the electrician record voltage, connected watts and conductor map for every unit, then compare reported heat use with the circuit rather than treating it as revenue-grade metering.
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Mysa identifies MYSA-V2-0 as a hardwired 120/240 V thermostat for compatible electric baseboards and selected fan-forced heaters, with TRIAC modulation, app and energy reporting.
$159 current U.S. direct price was retained for MYSA-V2-0. Every independently controlled room or circuit needs its own compatible thermostat; gang work, rewiring and additional units are separate
Direct 120/240 VAC line-voltage control for compatible electric baseboards and specified fan-forced loads; it cannot control a 24 V furnace, boiler zone or mini-split No conventional HVAC stages: solid-state control modulates one bounded electric-heat circuit rather than commanding compressor, fan and auxiliary stages No heat-pump, compressor, cooling, auxiliary or dual-fuel control path Hardwired line voltage and exact conductor topology are required; combined heater load must remain within model current and wattage limits and the circuit breaker rating Each unit senses and controls its room circuit; grouping in software coordinates setpoints but does not turn one thermostat into multi-circuit load control
Mysa account, app, Wi-Fi, geofencing, integrations and energy reports process device, location and usage data under Mysa policy Wall setpoint and retained schedules provide bounded local operation, while remote changes, reports, geofence, weather and integrations depend on cloud connectivity Two-year limited warranty terms apply. Modulation, schedules and energy estimates do not guarantee comfort, savings, heater life, safety or exact consumption
Certified connected thermostats must retain basic thermostat operation without service-provider connectivity, support schedules and report energy-use information; certification is not a household comfort or savings guarantee.
EPA directs buyers to match HVAC type, voltage, wires, variable speed, stages and zoning before purchase and notes that line-voltage and complex systems often require specialized controls or professional installation.
Heat-pump performance depends on the complete equipment and controls; thermostat stage or app labels do not establish capacity, auxiliary-heat economics, dual-fuel operation or delivered comfort.
FTC consumer guidance covers router security, unique passwords, updates and privacy settings for connected devices; cloud convenience does not remove household security and access duties.
Hands-on review evaluates high-voltage compatibility, electrician installation, display, app and electric-heat ownership tradeoffs.
Exact-product purchasers discuss conductor fit, heat load, temperature readings, app, energy reports and support. Manufacturer-hosted reports are self-selected.
Smart Thermostat for Electric In-Floor Heating is the line-voltage electric radiant-floor control defended alternative at $199 current U.S. direct price.
Connected Control BCC110 is the high-stage conventional hvac-professional control defended alternative at $189 current U.S. retail price.
Manufacturer identity, exact product or support documentation, current U.S. price, independent decision evidence and bounded owner or installer evidence were checked on August 19, 2026. This desk covers complete current U.S.-supported residential thermostat and HVAC-control systems where conventional low-voltage relays, proprietary communicating control, line-voltage electric heat, radiant-floor control or mini-split infrared retrofit materially changes the decision. It excludes bare sensors, faceplates, cosmetic finishes, multipacks, dealer software licenses, unsupported prior generations, portable-heater controls and smoke or carbon-monoxide life-safety alarms. Voltage, transformer, terminals, stages, heat-pump, auxiliary, emergency-heat, dual-fuel, proprietary-bus, accessory, zoning and sensor limits are exact-model facts. A room sensor can influence one equipment zone without creating duct zoning. Mini-split IR controllers can miss commands or lose state when the native remote is used and cannot override shared-outdoor-unit mode limits. Local wall control and stored schedules differ from app, voice, weather, geofence, history, firmware and demand-response services that require accounts, cloud and connectivity. Demand-response enrollment is voluntary and utility-specific. Turn off equipment power and use a qualified HVAC technician or electrician for uncertain low-voltage, communicating, dual-transformer, line-voltage, wet-area or multi-equipment work. Compressor delays, balance points, stage timing, O/B, fan, fuel and dual-fuel settings must match the equipment manual. Alerts, temperature, humidity, TVOC and CO2-equivalent readings are not equipment diagnosis, source identification, health diagnosis or safety clearance and do not replace smoke and CO alarms. No thermostat or control guarantees comfort, even rooms, energy savings, utility rewards, freeze protection, equipment life, fault prevention or uninterrupted service.
Researching another model?