Midea · MAD50PS1QWT-A
Ready to buy
The retained reference is $299.99 current U.S. retail reference. Confirm the A-suffix, included pump hose, supported maximum lift and return terms at checkout. Verify recall status, receptacle location, filter access and the full condensate route before the return window closes.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Confirm the A-suffix, included pump hose, supported maximum lift and return terms at checkout. Confirm exact current U.S. stock, tax, delivery, accessories and return terms before paying.
Choose the pump Cube when the exact lift and hose path have been proven and the buyer accepts added pump cleaning and failure modes.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
Midea
GE Appliances
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
Cube 50 Pint with Pump was checked against exact manufacturer identity and operating support, current U.S. price, standardized capacity basis, drain path, operating and safety limits, independent editorial evidence and bounded owner reports.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner discussion returns to pump priming, lift reliability, retained tank water, app alerts and line cleaning rather than a universal moisture-control result.
These are self-reported experiences from different temperatures, starting humidity, room volumes, enclosure quality, water sources, setpoints, sensor placements, drain elevations, duty cycles, electrical conditions, app versions and maintenance histories. They identify checks to run and do not prove standardized capacity, energy use, drying time, mold remediation, reliability, safety or failure rates.Exact pump-model owners discuss lift reliability, residual bucket water, app pairing, noise and cleaning. Reports are self-selected and cannot establish pump failure rate.
Bench-test the exact pump route and outage recovery while the unit remains observable, then inspect the line on a fixed schedule.
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Midea identifies exact model MAD50PS1QWT-A as the 50-pint Cube with SmartHome controls and an internal pump for drains above the appliance.
$299.99 current U.S. retail reference was retained for exact model MAD50PS1QWT-A. Confirm the A-suffix, included pump hose, supported maximum lift and return terms at checkout
The pump version retains a 50-pint-per-day DOE dehumidification rating; pump throughput and lift are separate from how much moisture the refrigeration system removes under the standardized condition Bucket, gravity hose and powered pump are distinct modes; the pump needs the exact small hose, has a finite vertical lift, leaves some water in the tank and may not resume automatically after every fault or outage Automatic defrost pauses the compressor around coil icing and the roughly 41 to 95°F stated range does not guarantee rated capacity at low temperature In addition to filter, bucket and coil-airflow care, periodically flush and inspect the pump reservoir and line so slime, kinks or a failed check path do not turn continuous drainage into overflow
SmartHome remote controls and alerts require app, account, network and supported firmware; a cloud alert is not a substitute for a tested drain, overflow plan or periodic inspection Use the grounded 115 V appliance on a dry stable surface with direct receptacle and any required GFCI, never an extension cord; sealed refrigerant and pump electrical service require qualified repair The exact current manual, one-year limited warranty reference and U.S. support route are retained; verify the full model and serial against CPSC notices rather than relying on brand or cabinet appearance
DOE defines the regulated product and requires current residential dehumidifier capacity and efficiency certification under Appendix X1. Capacity is a defined laboratory measurement, not a site-specific drying promise.
ENERGY STAR Version 6.0 defines portable and whole-home configurations separately and measures integrated energy factor in liters removed per kilowatt-hour under the referenced test procedure.
EPA centers moisture-source correction, drying, ventilation and appropriate remediation; a dehumidifier can help control humidity but does not replace water repair or mold cleanup.
CPSC dehumidifier recalls identify exact brands, model numbers, serial ranges, hazards and remedies. A familiar brand or capacity is not enough to determine recall status.
Independent laboratory coverage includes Midea high-capacity dehumidifiers and separates water removal, humidistat accuracy, noise, energy and convenience; exact pump configuration still needs model-level confirmation.
Exact pump-model owners discuss lift reliability, residual bucket water, app pairing, noise and cleaning. Reports are self-selected and cannot establish pump failure rate.
Cube 50 Pint is the high-capacity bucket or floor-drain basements alternative at $249.99 current U.S. retail reference.
50 Pint Dehumidifier with Pump is the locally controlled pump-equipped basement unit alternative at $329 current U.S. retail reference.
Manufacturer identity, exact manual or support record, current U.S. price, standardized capacity basis, operating range, drainage configuration, independent editorial testing or analysis and bounded exact-model owner evidence were checked on August 17, 2026. This desk covers complete current or actively supported U.S.-market portable and purpose-built crawlspace or basement residential dehumidifiers for serious home use. It excludes HVAC-integrated whole-home systems requiring dealer design, air conditioners and combination appliances unless dehumidification is the supported primary product, disposable absorbers, cosmetic-only variants and unsupported marketplace models. DOE portable capacity is measured under a defined laboratory condition and is not a promise of daily collection in a cooler, drier or leakier space. AHAM and saturation figures use different conditions and are not interchangeable. Room-size headlines depend on moisture load, enclosure, temperature, air mixing and recovery time. Gravity drain, powered pump, maximum hose lift, retained reservoir water and outage recovery are separate facts. Defrost protects the coil but does not preserve rated output at low temperature. Humidistats and app readings are control signals, not calibrated building diagnostics. Refrigerant, A2L flammability, grounding, GFCI, extension-cord, standing-water and service instructions follow the exact model manual and local requirements. A dehumidifier manages airborne moisture after bulk water, drainage, ventilation and vapor entry are addressed. It does not stop leaks, remove standing or contaminated water, remediate mold, diagnose a building, guarantee a humidity or drying deadline, prevent illness or replace qualified electrical, refrigeration, foundation, flood or remediation work.
Researching another model?