Midea · MAD35S1QWT
Ready to buy
The retained reference is $229.99 current U.S. retail reference. Confirm exact capacity and pump absence because Cube listings commonly group 20-, 35-, 50-pint and pump versions. Verify recall status, receptacle location, filter access and the full condensate route before the return window closes.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Confirm exact capacity and pump absence because Cube listings commonly group 20-, 35-, 50-pint and pump versions. Confirm exact current U.S. stock, tax, delivery, accessories and return terms before paying.
Cube 35 is the balanced Cube when a 20-pint model is undersized and the room does not justify the heat, draw and bulk of a 50-pint compressor.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
Midea
Midea
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
Cube 35 Pint was checked against exact manufacturer identity and operating support, current U.S. price, standardized capacity basis, drain path, operating and safety limits, independent editorial evidence and bounded owner reports.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner discussion returns to reservoir weight, fan tone, humidity reading, app behavior and hose setup rather than a universal moisture-control result.
These are self-reported experiences from different temperatures, starting humidity, room volumes, enclosure quality, water sources, setpoints, sensor placements, drain elevations, duty cycles, electrical conditions, app versions and maintenance histories. They identify checks to run and do not prove standardized capacity, energy use, drying time, mold remediation, reliability, safety or failure rates.Exact-model owners discuss reservoir weight, humidity display, app setup, fan tone, drainage and cleaning. The manufacturer-hosted sample is self-selected.
Test the unit at the intended setpoint with a separate hygrometer and prove the downhill hose path before the return window closes.
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Midea identifies exact model MAD35S1QWT as the middle Cube with 35-pint standardized capacity, a large adjustable bucket, gravity drain and SmartHome control.
$229.99 current U.S. retail reference was retained for exact model MAD35S1QWT. Confirm exact capacity and pump absence because Cube listings commonly group 20-, 35-, 50-pint and pump versions
MAD35S1QWT is rated at 35 pints per 24 hours under the current DOE condition, not the warmer saturation condition sometimes used in older or commercial comparisons The adjustable bucket offers several stop levels and the hose outlet drains only downhill; the nested operating arrangement and drain elevation must follow the exact manual Automatic defrost protects the coil in the stated roughly 41 to 95°F operating band by interrupting moisture removal; it does not create full rated output in a cold crawlspace Clean and fully dry the reusable filter, bucket and hose on schedule, keep intake and discharge clearance, and inspect for biofilm or blockage before seasonal restart
SmartHome and voice integration require the supported app, account and Wi-Fi; remote readings are control signals, not calibrated building diagnostics, and schedules may be unavailable during a service outage Use the nameplate 115 V grounded connection without an extension cord, protect it from splash and standing water, and follow the exact manual and local GFCI requirements; refrigerant service belongs to qualified personnel The exact U.S. warranty and registration path are retained; verify model and serial against CPSC recall tools and do not substitute the recall status of a visually similar older appliance
DOE defines the regulated product and requires current residential dehumidifier capacity and efficiency certification under Appendix X1. Capacity is a defined laboratory measurement, not a site-specific drying promise.
ENERGY STAR Version 6.0 defines portable and whole-home configurations separately and measures integrated energy factor in liters removed per kilowatt-hour under the referenced test procedure.
EPA centers moisture-source correction, drying, ventilation and appropriate remediation; a dehumidifier can help control humidity but does not replace water repair or mold cleanup.
CPSC dehumidifier recalls identify exact brands, model numbers, serial ranges, hazards and remedies. A familiar brand or capacity is not enough to determine recall status.
Independent instrumented coverage names MAD35S1QWT and compares extraction, noise, controls and current availability under stated room conditions.
Exact-model owners discuss reservoir weight, humidity display, app setup, fan tone, drainage and cleaning. The manufacturer-hosted sample is self-selected.
Cube 20 Pint is the compact rooms and long bucket intervals alternative at $179.99 current U.S. retail reference.
Cube 50 Pint is the high-capacity bucket or floor-drain basements alternative at $249.99 current U.S. retail reference.
Manufacturer identity, exact manual or support record, current U.S. price, standardized capacity basis, operating range, drainage configuration, independent editorial testing or analysis and bounded exact-model owner evidence were checked on August 17, 2026. This desk covers complete current or actively supported U.S.-market portable and purpose-built crawlspace or basement residential dehumidifiers for serious home use. It excludes HVAC-integrated whole-home systems requiring dealer design, air conditioners and combination appliances unless dehumidification is the supported primary product, disposable absorbers, cosmetic-only variants and unsupported marketplace models. DOE portable capacity is measured under a defined laboratory condition and is not a promise of daily collection in a cooler, drier or leakier space. AHAM and saturation figures use different conditions and are not interchangeable. Room-size headlines depend on moisture load, enclosure, temperature, air mixing and recovery time. Gravity drain, powered pump, maximum hose lift, retained reservoir water and outage recovery are separate facts. Defrost protects the coil but does not preserve rated output at low temperature. Humidistats and app readings are control signals, not calibrated building diagnostics. Refrigerant, A2L flammability, grounding, GFCI, extension-cord, standing-water and service instructions follow the exact model manual and local requirements. A dehumidifier manages airborne moisture after bulk water, drainage, ventilation and vapor entry are addressed. It does not stop leaks, remove standing or contaminated water, remediate mold, diagnose a building, guarantee a humidity or drying deadline, prevent illness or replace qualified electrical, refrigeration, foundation, flood or remediation work.
Researching another model?