Eco-Logical · OMNI-50HP2-1A
Ready to buy
The retained equipment reference is $3,950 current U.S. retail reference. Confirm 240V HP2 rather than 120V HP1, included line length and mixing valve, and installer training before purchase. Require permit, electrical, condensate, duct, mixing, drain, warranty and commissioning line items before the return or cancellation deadline.
Current market
Each line carries its own check date because price, software, specifications, and product cycle do not age at the same speed.
Confirm 240V HP2 rather than 120V HP1, included line length and mixing valve, and installer training before purchase. Confirm current authorized U.S. stock, tax, freight, accessories, installation, warranty and return terms before paying.
Choose OMNI when indoor air and height are the binding constraints and an installer can own the outdoor unit, line set, mixing and backup design.
Other paths
These are not generic competitors. Each one represents a different way to buy into the same market.
SANCO2
Cala Systems
What changed
Older observations stay in the ledger when the current view changes. That lets a buyer tell the difference between an old complaint, an active issue, and a problem that was corrected.
OMNI 50 Gallon 240V Split was checked against exact manufacturer identity and support, current U.S. equipment price, DOE and independent performance evidence, complete electrical, air, condensate, plumbing, maintenance, warranty and incentive boundaries, and bounded owner or installer reports.
Each amount stays tied to its source and capture date. Conflicting prices remain visible until the seller resolves them.
Current reference priceA structured timeline will begin with the next source capture
Owner experience
Owner and installer discussion returns to installer training, line-set routing, outdoor sound, low-ambient backup and parts support rather than a universal efficiency or hot-water result.
These are self-reported experiences from different climates, inlet-water temperatures, draw patterns, setpoints, modes, source-air rooms, ducts, condensate routes, circuits, plumbing systems, water chemistry, tariffs, installer skill, firmware and service regions. They identify checks to run and do not establish energy savings, hot-water availability, sound, reliability, failure, health, safety, code-compliance or incentive rates.An installer and prospective buyers discuss the exact OMNI architecture and the scarcity of U.S. contractors and parts experience. It is early, self-interested and not a reliability sample.
Admission depends on a named trained installer, approved line route and written warranty labor plan, not the equipment specification alone.
1 evidence recordSources
The page separates what a source states directly from what we conclude across sources.
Eco-Logical identifies exact model OMNI-50HP2-1A as a 50-gallon indoor tank with outdoor inverter heat pump, field Eco-Connect refrigerant lines, included mixing valve and electric backup.
$3,950 current U.S. retail reference was retained for exact model OMNI-50HP2-1A. Confirm 240V HP2 rather than 120V HP1, included line length and mixing valve, and installer training before purchase
Eco-Logical publishes 50 gallons nominal, up to a 75-gallon first-hour rating for the family and 4.23 UEF for OMNI-50HP2; retain the exact EnergyGuide rather than a family range at contract The outdoor Panasonic inverter supplies heat-pump output down to about 5°F before backup strategy dominates, while dual tank elements support cold or high demand; hybrid performance depends on control and outdoor conditions The 240V system uses one specified home run for tank and outdoor unit, but exact breaker, disconnect, conductor, line-set separation and code treatment require the installation manual and permit The outdoor heat pump removes indoor room-volume and condensate concerns but needs clearance, snow, drainage, noise and service siting; the semi-rigid line set is limited to supported routing and length
The family publishes roughly 48.7 to 49.7 dBA outside and R-513A; property-line sound, vibration, flare-free connection integrity and sealed-system service remain installer boundaries The included thermostatic mixing valve controls superheated storage delivery only when correctly installed and maintained; T&P, expansion, pan, restraint, anti-scald fixtures and local backflow rules still apply Inspect outdoor coil, drain and mounting, line set, tank anode or lining, mixing valve, elements, sediment and T&P valve; winter backup and shutoff behavior should be tested The 10-year limited reference excludes broad labor and water-damage outcomes; current owner evidence highlights a thin U.S. contractor and parts network that must be resolved locally
DOE defines UEF, draw pattern and first-hour rating for covered residential water heaters. These laboratory terms support comparable ratings but do not predict one household's loads, ambient conditions or utility bill.
ENERGY STAR identifies exact current models, voltage class, rated storage, first-hour rating, UEF, refrigerant and compressor cutoffs. Certification is not an installation, delivery or savings guarantee.
NEEA independently classifies current residential integrated and split systems by exact model, tier, cold-climate efficiency, connectivity and qualification date.
ENERGY STAR's professional guide separates integrated and split-system sizing, source-air, duct, condensate, electrical and commissioning decisions and notes that resistance backup depends on sizing and demand.
CDC explains that 130 to 140°F storage can reduce germs such as Legionella but raises burn risk, and recommends thermostatic mixing when water is set above 120°F. Risk is system-wide and health-specific.
CPSC advises a 120°F water-heater setting to reduce scald risk. Any higher-temperature storage and mixing strategy requires careful reconciliation with health guidance, local code and vulnerable occupants.
NEEA, ENERGY STAR, JA13, utility and tax references are exact-model and date sensitive; family claims and low-GWP refrigerant do not guarantee eligibility, savings or payback IRS requires an eligible home and product, current efficiency rules and retained purchase and installation documentation; 2026 qualified-product identification rules also apply.
Independent judges identify OMNI's separate indoor tank and outdoor heat pump, service access and constrained-space value while not promising field outcomes.
An installer and prospective buyers discuss the exact OMNI architecture and the scarcity of U.S. contractors and parts experience. It is early, self-interested and not a reliability sample.
Gen5 43 Gallon System is the cold-climate co2 split system alternative at $5,845 current U.S. system retail reference.
Cala Heat Pump Water Heater is the predictive connected thermal-storage system alternative at $2,999 current manufacturer retail reference.
Manufacturer identity, exact model specification or manual, current U.S. equipment price, current certification or independent professional evidence and bounded owner or installer evidence were checked on August 19, 2026. This desk covers complete current U.S.-supported residential integrated and split heat-pump or hybrid-electric water-heater systems whose electrical, recovery, storage, mixing, control or installation architecture materially changes the buyer decision. It excludes conventional-only tanks, add-on heat pumps without a supported complete system, unsupported marketplace imports, commercial central plants, capacity or color padding, rebadged OEM duplicates and accessory bundles. Nominal tank size, DOE rated storage, draw pattern, UEF and first-hour rating are different facts measured under defined conditions and do not guarantee household energy use, bills or hot-water availability. Compressor output and resistance backup depend on exact mode, ambient and inlet-water temperature, setpoint, airflow, demand and supply voltage. A 120V plug-in claim does not waive branch-load, GFCI, receptacle, conductor, disconnect, permit or panel review. Integrated units require the manual's air volume, clearances, temperature, duct static pressure and condensate disposal and will cool and dehumidify their source space. Split units exchange those constraints for outdoor siting, snow, drainage, noise, line or water-pipe routing and freeze protection. Published dBA and refrigerant data apply to stated tests and exact models; sealed-system work belongs to qualified service. T&P discharge, thermal expansion, backflow, pan, drain, restraint, seismic and electrical requirements follow adopted code and the authority having jurisdiction. Stored water, especially systems using elevated temperature and mixing, creates scald risk; thermostatic valves and anti-scald fixtures need commissioning and maintenance and can fail. Legionella risk depends on the whole building water system, including temperature, dwell time, stagnation, disinfectant residual, recirculation and user susceptibility. Follow local health and plumbing guidance rather than treating a tank setpoint as a health guarantee. Filters, condensate, coils, sediment, anodes where fitted, electronic anodes, mixing valves, leak devices and T&P valves need exact scheduled access and service. Warranty terms separate tank, compressor, parts, labor, registration, authorized seller, water quality, shipping and service network. Tax credits, rebates and demand-response payments depend on the exact installed model, date, documentation, home, utility and taxpayer. No dossier guarantees energy savings, a bill, hot-water delivery, quietness, equipment life, leak containment, health, scald prevention, code approval, incentive eligibility or service outcome.
Researching another model?